Snapper 7800379 Installing the Seat, 5/16-18 x 3/4, Axion / 150Z Series, 19-25 N.m 14-19 ft. lbs

Page 9

Axion / 150Z Series

Installing the Seat

1.Raise the seat base.

2.Align the holes in the seat bottom with the holes in the seat base.

3.Secure the seat to the seat base with four 5/16-18 x 3/4” bolts. Torque to 14-19 ft. lbs. (19-25 N.m.) See Figure 5.

19-25 N.m.

14-19 ft. lbs.

5/16-18 x 3/4

Figure 5. Installing the seat

8/2008

TP 300-5412---ZT-SN

Image 9

Contents Axion / 150Z Series Initial setupTABLE OF CONTENTS Axion / 150Z SeriesSETUP PROCEDURES GENERAL OPERATION TRANSPORTING AND STORAGESAFETY RULES CHILDREN SLOPE OPERATIONEMISSIONS TOWED EQUIPMENT RIDE-ON UNITSSERVICE AND MAINTENANCE Service & MaintenanceSafe Handling of Gasoline Charge the battery Note proceed with other setup steps Quick Setup Listwhile battery is charging Front tires 18-20 psi, rear tires 10-12 psiIMPORTANT NOTE UncratingDO NOT TOW RIDER Figure 1. Pushing the riderCharge Battery Battery Activation InstallationInstall Battery Figure 2. Charging the battery5/16-18 x 3/4 Installing the SeatFigure 5. Installing the seat 19-25 N.m 14-19 ft. lbsInstalling the Seat Safety Switch Figure 6. Installing the seat safety switchBB D 5/16-18 5/16-18 x 1-3/4 Setting Up the Ground Speed Control LeversFigure 7. Setting up the ground speed levers 20-23 N.m 15-17 ft. lbsNote Use a wooden block to prevent blade rotation Torque Mower Blade HardwareA B 41-54 N.m 30-40 ft. lbs Figure 8. Torquing the mower blade hardware 33” DeckA B 108-122 N.m 80-90 ft. lbs Figure 9. Torquing the mower blade hardware 42” Deck A B 61-75 N.m45-55 ft. lbs Figure 10. Torquing the mower blade hardware 50” Deck Reduce & Check Tire Pressures Check Fluid LevelsFill & Check Engine Oil SizeGrease Lubrication42” Deck shown, all decks similar Figure 13. Lubrication deck Figure 14. Lubrication ground speed control leversCHECK RIDER SAFETY SYSTEM Operational SAFETY ChecksBurnish PTO Clutch