Snapper 400 Series manual Features & Controls

Page 13

Fuel Tank

To remove the cap, turn counterclockwise.

PTO Switch

The PTO (Power Take-Off) switch engages and disen- gages attachments that use the PTO. To engage the PTO, pull UP on the switch. Push DOWN to disengage. Note that the operator must be seated firmly in the trac- tor seat for the PTO to function.

Features & Controls

Mower Height of Cut Adjustment

The cutting height adjustment knob controls the mower cutting height. The cutting height is infinitely adjustable between 1” and 3-3/4.”

Seat Adjustment Lever

The seat can be adjusted forward and back. Move the lever, position the seat as desired, and release the lever to lock the seat into position.

Transmission Release Valve Lever

The transmission release valve lever deactivates the transmission so that the tractor can be pushed by hand. See PUSHING THE TRACTOR BY HAND for opera- tional information.

Ignition Switch

The ignition switch starts and stops the engine, it has three positions:

OFF

Stops the engine and shuts off the

 

electrical system.

RUN

Allows the engine to run and powers the

 

electrical system.

START

Cranks the engine for starting.

NOTE: Never leave the ignition switch in the RUN posi- tion with the engine stopped–this drains the battery.

Brake Pedal

Depressing the brake pedal applies the tractor brake.

Ground Speed Lever

The tractor’s forward ground speed is controlled by the forward ground speed control lever. The tractor’s reverse ground speed is controlled by the reverse ground speed control pedal.

Moving the lever forward will increase ground speed. Note that the further forward the lever is moved, the faster the tractor will travel.

Parking Brake

The parking brake knob is used to lock the parking brake when the tractor is stopped. Fully depressing the brake pedal and pulling up on the knob engages the parking brake. Refer to page 10 for a full explanation of parking brake functions.

Attachment Lift Control Lever

When using the mower deck, lift the deck off the ground while transporting to and from the job site. DO NOT cut with the mower in the raised, transport position.

Reverse Mowing Option (RMO)

The Reverse Mowing Option allows for mowing (or use of other PTO driven attachments) while traveling in reverse. If you choose to mow or operate another attachment in reverse, turn the RMO key after the PTO is engaged. The L.E.D. light will illuminate, and the opera- tor can then mow in reverse. Each time the PTO is dis- engaged the RMO needs to be reactivated if desired.

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 16HP Hydro Riders 13HP Hydro Riders Mower DecksPage Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationIgnition System Service and Maintenance CE Identification TAG Markings Identification NumbersNorth American CE ModelsSafety Decals Safety DecalsNorth American Models CE ModelsSafety Icons CE Safety IconsThrottle/Choke Control Control FunctionsThrottle Control ChokeFeatures & Controls Operational Safety Checks General Operating SafetyAdding Fuel Checks Before StartingStarting the Engine Operating the RiderStopping the Rider Selecting Ground & Engine SpeedOperating the Mower Attachment Operation in Reverse Mowing in ReversePushing the Rider by Hand Mower Removal and Installation Storage Check Tire Pressures Regular MaintenanceFuel Filter Raising the Seat DeckLubrication Regular MaintenanceCleaning the Battery and Cables Battery MaintenanceLubricate Rear Axle Shafts Removing The Blade Servicing the Mower BladesTroubleshooting the Rider Troubleshooting Adjustments & ServiceTroubleshooting the Mower Troubleshooting, Adjustment & ServiceTroubleshooting the Rider Steering Gear Adjustment Seat AdjustmentSteering Wheel Adjustment Brake Adjustment AdjustmentsBrake Adjustment Blade Brake CheckSide-To-Side Leveling Mower AdjustmentsFront-To-Back Leveling Transport Height Adjustment Battery ChargingRider Drive Belt Belt ReplacementMower Belt Engine DimensionsTransmission ChassisMaintenance Items Replacement PartsOptional Accessories Technical ManualsPage Lawn Care Lawn Care & Mowing Information Page

400 Series specifications

The Snapper 400 Series is a robust line of riding lawn mowers designed for homeowners looking for efficiency and power in lawn maintenance. This series is known for its reliable performance, user-friendly features, and innovative technology, making it a popular choice among homeowners and landscaping professionals alike.

One of the standout features of the Snapper 400 Series is its powerful engine options. Equipped with a range of high-performance Briggs & Stratton engines, these mowers offer impressive torque and cutting capabilities. The series is designed to handle diverse lawn conditions, from flat terrains to steep inclines, providing a consistent cutting experience.

Ergonomics play a crucial role in the design of the Snapper 400 Series. The mowers come with an adjustable seat, allowing users to find their ideal position for comfort during longer mowing sessions. The intuitive dashboard features all necessary controls within easy reach, enabling users to operate the mower with minimal effort.

The cutting decks in the Snapper 400 Series are engineered for versatility. With options for both side discharge and mulching, users can choose the best approach for their lawn. The mowing heights are adjustable, allowing for a custom cut that suits individual preferences and grass types. Additionally, the steel cutting decks provide durability, ensuring that the mowers withstand frequent use without significant wear.

Another notable innovation within the Snapper 400 Series is the ReadyStart technology. This system ensures that the engine starts easily with just one pull, eliminating the frustration that comes with traditional pull-start engines. The use of a hydrostatic transmission offers smooth and precise control over speed and direction, further enhancing the mowing experience.

The Snapper 400 Series is also aesthetically designed, with a modern appearance that appeals to a wide range of consumers. Its compact size allows it to navigate through tighter spaces, making it practical for varied landscape designs.

Overall, the Snapper 400 Series combines power, comfort, and innovative features to deliver exceptional lawn care solutions. Whether you are an experienced landscaper or a first-time mower owner, the Snapper 400 Series provides the tools necessary for effective and enjoyable lawn maintenance. Its reputation for durability and performance makes it a top contender in the riding mower market.
Top Page Image Contents