Snapper 400 Series manual Servicing the Mower Blades, Removing The Blade

Page 24

Regular Maintenance

SERVICING THE MOWER BLADES

WARNING

For your personal safety, do not handle the sharp mower blades with bare hands. Careless or improper handling of blades may result in serious injury.

1.Remove mower from the rider.

2.Blades should be sharp and free of nicks and dents. If not, sharpen blades as described in following steps.

3.To remove blade for sharpening, use wooden block to hold blade while removing the blade mounting cap- screw (Figure 19).

4.Use a file to sharpen blade to fine edge. Remove all nicks and dents in blade edge. If blade is severely damaged, it should be replaced.

5.Balance the blade as shown in Figure 20. Center the blade’s hole on a nail lubricated with a drop of oil. A balanced blade will remain level.

6.Reinstall each blade with the tabs pointing up toward deck as shown in Figure 21. Secure with a capscrew (D), cup washer (C) and hex washer (B). Use a wooden block to prevent blade rotation and torque capscrews to 45-55 ft-lbs (61-75 N-m).

WARNING

For your personal safety, blade mounting capscrews must each be installed with a hex washer and spring washer, then securely tightened. Torque blade mounting capscrew to 45-55 ft-lbs (61-75 N-m.)

LOOSEN

Figure 19. Removing The Blade

Figure 20 Balancing The Blade

B

C

D

A

Torque to

45-55 ft-lbs

Figure 21. Installing The Blade

A.

Wooden Block

C. Cup Washer

B.

Hex Washer

D. Capscrew

22

Page 23 Page 25
Image 24
Page 23 Page 25
Contents 13HP Hydro Riders Mower Decks 16HP Hydro RidersPage Table of Contents Safety Rules & Information Operating Safety Safety Rules and Information Slope OperationSafety Rules & Information General OperationIgnition System Service and Maintenance Identification Numbers CE Identification TAG MarkingsNorth American CE ModelsSafety Decals Safety DecalsNorth American Models CE ModelsCE Safety Icons Safety IconsControl Functions Throttle/Choke ControlThrottle Control ChokeFeatures & Controls General Operating Safety Operational Safety ChecksAdding Fuel Checks Before StartingOperating the Rider Starting the EngineSelecting Ground & Engine Speed Stopping the RiderOperating the Mower Mowing in Reverse Attachment Operation in ReversePushing the Rider by Hand Mower Removal and Installation Storage Regular Maintenance Check Tire PressuresRaising the Seat Deck Fuel FilterRegular Maintenance LubricationBattery Maintenance Cleaning the Battery and CablesLubricate Rear Axle Shafts Servicing the Mower Blades Removing The BladeTroubleshooting Adjustments & Service Troubleshooting the RiderTroubleshooting, Adjustment & Service Troubleshooting the MowerTroubleshooting the Rider Seat Adjustment Steering Gear AdjustmentSteering Wheel Adjustment Adjustments Brake AdjustmentBrake Adjustment Blade Brake CheckMower Adjustments Side-To-Side LevelingFront-To-Back Leveling Battery Charging Transport Height AdjustmentBelt Replacement Rider Drive BeltMower Belt Dimensions EngineTransmission ChassisReplacement Parts Maintenance ItemsOptional Accessories Technical ManualsPage Lawn Care Lawn Care & Mowing Information Page

400 Series specifications

The Snapper 400 Series is a robust line of riding lawn mowers designed for homeowners looking for efficiency and power in lawn maintenance. This series is known for its reliable performance, user-friendly features, and innovative technology, making it a popular choice among homeowners and landscaping professionals alike.

One of the standout features of the Snapper 400 Series is its powerful engine options. Equipped with a range of high-performance Briggs & Stratton engines, these mowers offer impressive torque and cutting capabilities. The series is designed to handle diverse lawn conditions, from flat terrains to steep inclines, providing a consistent cutting experience.

Ergonomics play a crucial role in the design of the Snapper 400 Series. The mowers come with an adjustable seat, allowing users to find their ideal position for comfort during longer mowing sessions. The intuitive dashboard features all necessary controls within easy reach, enabling users to operate the mower with minimal effort.

The cutting decks in the Snapper 400 Series are engineered for versatility. With options for both side discharge and mulching, users can choose the best approach for their lawn. The mowing heights are adjustable, allowing for a custom cut that suits individual preferences and grass types. Additionally, the steel cutting decks provide durability, ensuring that the mowers withstand frequent use without significant wear.

Another notable innovation within the Snapper 400 Series is the ReadyStart technology. This system ensures that the engine starts easily with just one pull, eliminating the frustration that comes with traditional pull-start engines. The use of a hydrostatic transmission offers smooth and precise control over speed and direction, further enhancing the mowing experience.

The Snapper 400 Series is also aesthetically designed, with a modern appearance that appeals to a wide range of consumers. Its compact size allows it to navigate through tighter spaces, making it practical for varied landscape designs.

Overall, the Snapper 400 Series combines power, comfort, and innovative features to deliver exceptional lawn care solutions. Whether you are an experienced landscaper or a first-time mower owner, the Snapper 400 Series provides the tools necessary for effective and enjoyable lawn maintenance. Its reputation for durability and performance makes it a top contender in the riding mower market.
Top Page Image Contents