Snapper 400 Series manual Raising the Seat Deck, Fuel Filter

Page 21

 

 

 

 

Regular Maintenance

B

C

D

 

Figure 10. Engine Compartment

 

 

A. Fuel Tank

 

 

 

 

 

 

 

 

B. Ignition Switch

 

 

 

 

C. Battery

 

 

 

 

D. Throttle / Choke Cable

A

 

 

 

E. PTO Switch (Electric Clutch)

 

 

 

F. Air Filter

 

 

 

E

 

 

 

G. Oil Fill / Dipstick

 

 

 

 

 

 

 

F

H. Fuel Filter

 

 

 

I. Oil Drain

 

 

 

 

I

G

H

RAISING THE SEAT DECK

To gain access to the engine compartment, simply tilt the seat deck forward.

ADDING FUEL

To add fuel:

1.Remove the fuel cap (A, Figure 10).

2.Fill the tank. Do not overfill. Leave room in the tank for fuel expansion. Refer to your engine manual for specific fuel recommendations.

3.Install and hand tighten the fuel cap.

FUEL FILTER

Do not use gasoline containing METHANOL, gasohol containing more than 10% ethanol, gasoline additives, premium gasoline, or white gas because engine/fuel system damage could result.

WARNING

The fuel filter is located in fuel line between fuel tank and carburetor. If filter is dirty or clogged, replace as follows. Place a container below filter to catch spilled gasoline.

1.Using a pliers, open and slide hose clamps from fuel filter.

2.Remove hoses from filter.

3.Install new filter in proper flow direction in fuel line. Secure with hose clamps. See warning at beginning of procedure.

OIL & FILTER CHANGE

Refer to engine owners manual.

CHECK / CHANGE AIR FILTER

Refer to engine owners manual.

REPLACE SPARK PLUG

Refer to engine owners manual.

Gasoline is highly flammable and must be handled with care. Never fill the tank when the engine is still hot from recent operation. Do not allow open flame, smoking or matches in the area. Avoid over-filling and wipe up any spills.

Do not remove fuel filter when engine is hot, as spilled gasoline may ignite. DO NOT spread hose clamps further than necessary. Ensure clamps grip hoses firmly over filter after installation.

19

Image 21
Contents 16HP Hydro Riders 13HP Hydro Riders Mower DecksPage Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationIgnition System Service and Maintenance CE Identification TAG Markings Identification NumbersNorth American CE ModelsSafety Decals Safety DecalsNorth American Models CE ModelsSafety Icons CE Safety IconsThrottle/Choke Control Control FunctionsThrottle Control ChokeFeatures & Controls Operational Safety Checks General Operating SafetyAdding Fuel Checks Before StartingStarting the Engine Operating the RiderSelecting Ground & Engine Speed Stopping the RiderOperating the Mower Mowing in Reverse Attachment Operation in ReversePushing the Rider by Hand Mower Removal and Installation Storage Check Tire Pressures Regular MaintenanceFuel Filter Raising the Seat DeckLubrication Regular MaintenanceBattery Maintenance Cleaning the Battery and CablesLubricate Rear Axle Shafts Removing The Blade Servicing the Mower BladesTroubleshooting the Rider Troubleshooting Adjustments & ServiceTroubleshooting, Adjustment & Service Troubleshooting the MowerTroubleshooting the Rider Seat Adjustment Steering Gear AdjustmentSteering Wheel Adjustment Brake Adjustment AdjustmentsBrake Adjustment Blade Brake CheckSide-To-Side Leveling Mower AdjustmentsFront-To-Back Leveling Transport Height Adjustment Battery ChargingBelt Replacement Rider Drive BeltMower Belt Engine DimensionsTransmission ChassisMaintenance Items Replacement PartsOptional Accessories Technical ManualsPage Lawn Care Lawn Care & Mowing Information Page

400 Series specifications

The Snapper 400 Series is a robust line of riding lawn mowers designed for homeowners looking for efficiency and power in lawn maintenance. This series is known for its reliable performance, user-friendly features, and innovative technology, making it a popular choice among homeowners and landscaping professionals alike.

One of the standout features of the Snapper 400 Series is its powerful engine options. Equipped with a range of high-performance Briggs & Stratton engines, these mowers offer impressive torque and cutting capabilities. The series is designed to handle diverse lawn conditions, from flat terrains to steep inclines, providing a consistent cutting experience.

Ergonomics play a crucial role in the design of the Snapper 400 Series. The mowers come with an adjustable seat, allowing users to find their ideal position for comfort during longer mowing sessions. The intuitive dashboard features all necessary controls within easy reach, enabling users to operate the mower with minimal effort.

The cutting decks in the Snapper 400 Series are engineered for versatility. With options for both side discharge and mulching, users can choose the best approach for their lawn. The mowing heights are adjustable, allowing for a custom cut that suits individual preferences and grass types. Additionally, the steel cutting decks provide durability, ensuring that the mowers withstand frequent use without significant wear.

Another notable innovation within the Snapper 400 Series is the ReadyStart technology. This system ensures that the engine starts easily with just one pull, eliminating the frustration that comes with traditional pull-start engines. The use of a hydrostatic transmission offers smooth and precise control over speed and direction, further enhancing the mowing experience.

The Snapper 400 Series is also aesthetically designed, with a modern appearance that appeals to a wide range of consumers. Its compact size allows it to navigate through tighter spaces, making it practical for varied landscape designs.

Overall, the Snapper 400 Series combines power, comfort, and innovative features to deliver exceptional lawn care solutions. Whether you are an experienced landscaper or a first-time mower owner, the Snapper 400 Series provides the tools necessary for effective and enjoyable lawn maintenance. Its reputation for durability and performance makes it a top contender in the riding mower market.