Snapper 400 Series manual Seat Adjustment, Steering Gear Adjustment, Steering Wheel Adjustment

Page 27

WARNING

To avoid serious injury, perform adjustments only with engine stopped, key removed and rider on level ground.

SEAT ADJUSTMENT

Use the lever on the front of the seat (A, Figure 22) on to adjust the seat forward or rearward for best rider com- fort.

STEERING GEAR ADJUSTMENT

If there is excessive slack in the steering system, the steering gear can be re-indexed to the steering shaft.

1.See Figure 23. Loosen the two capscrews (A) and push bracket so that gear teeth are closely meshed.

2.Tighten nuts after adjustment. Torque to 35 - 40ft-lbs.

STEERING WHEEL ADJUSTMENT

Your unit is equipped with a dual position steering shaft to allow for steering wheel adjustment for rider comfort.

1.Pull down on the rubber boot to expose the two holes in the steering shaft (A, Figure 24).

2.Use a suitable drift to remove the roll pin at the base of the steering wheel.

3.Align the hole in the steering wheel with the appropri- ate steering shaft hole and install the roll pin.

NOTE: Steering wheel is factory installed with the roll pin in the bottom hole.

Troubleshooting, Adjustment & Service

A

Figure 22. Seat Adjustment

A. Seat Adjustment Lever

*2401

Capscrews

Figure 23. Steering Gear Adjustment

A.Capscrews

A

Figure 24. Steering Wheel Height Adjustment A. Steering Shaft

25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents 16HP Hydro Riders 13HP Hydro Riders Mower DecksPage Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationIgnition System Service and Maintenance CE Models Identification NumbersCE Identification TAG Markings North AmericanCE Models Safety DecalsSafety Decals North American ModelsSafety Icons CE Safety IconsChoke Control FunctionsThrottle/Choke Control Throttle ControlFeatures & Controls Checks Before Starting General Operating SafetyOperational Safety Checks Adding FuelStarting the Engine Operating the RiderSelecting Ground & Engine Speed Stopping the RiderOperating the Mower Mowing in Reverse Attachment Operation in ReversePushing the Rider by Hand Mower Removal and Installation Storage Check Tire Pressures Regular MaintenanceFuel Filter Raising the Seat DeckLubrication Regular MaintenanceBattery Maintenance Cleaning the Battery and CablesLubricate Rear Axle Shafts Removing The Blade Servicing the Mower BladesTroubleshooting the Rider Troubleshooting Adjustments & ServiceTroubleshooting, Adjustment & Service Troubleshooting the MowerTroubleshooting the Rider Seat Adjustment Steering Gear AdjustmentSteering Wheel Adjustment Blade Brake Check AdjustmentsBrake Adjustment Brake AdjustmentSide-To-Side Leveling Mower AdjustmentsFront-To-Back Leveling Transport Height Adjustment Battery ChargingBelt Replacement Rider Drive BeltMower Belt Chassis DimensionsEngine TransmissionTechnical Manuals Replacement PartsMaintenance Items Optional AccessoriesPage Lawn Care Lawn Care & Mowing Information Page

400 Series specifications

The Snapper 400 Series is a robust line of riding lawn mowers designed for homeowners looking for efficiency and power in lawn maintenance. This series is known for its reliable performance, user-friendly features, and innovative technology, making it a popular choice among homeowners and landscaping professionals alike.

One of the standout features of the Snapper 400 Series is its powerful engine options. Equipped with a range of high-performance Briggs & Stratton engines, these mowers offer impressive torque and cutting capabilities. The series is designed to handle diverse lawn conditions, from flat terrains to steep inclines, providing a consistent cutting experience.

Ergonomics play a crucial role in the design of the Snapper 400 Series. The mowers come with an adjustable seat, allowing users to find their ideal position for comfort during longer mowing sessions. The intuitive dashboard features all necessary controls within easy reach, enabling users to operate the mower with minimal effort.

The cutting decks in the Snapper 400 Series are engineered for versatility. With options for both side discharge and mulching, users can choose the best approach for their lawn. The mowing heights are adjustable, allowing for a custom cut that suits individual preferences and grass types. Additionally, the steel cutting decks provide durability, ensuring that the mowers withstand frequent use without significant wear.

Another notable innovation within the Snapper 400 Series is the ReadyStart technology. This system ensures that the engine starts easily with just one pull, eliminating the frustration that comes with traditional pull-start engines. The use of a hydrostatic transmission offers smooth and precise control over speed and direction, further enhancing the mowing experience.

The Snapper 400 Series is also aesthetically designed, with a modern appearance that appeals to a wide range of consumers. Its compact size allows it to navigate through tighter spaces, making it practical for varied landscape designs.

Overall, the Snapper 400 Series combines power, comfort, and innovative features to deliver exceptional lawn care solutions. Whether you are an experienced landscaper or a first-time mower owner, the Snapper 400 Series provides the tools necessary for effective and enjoyable lawn maintenance. Its reputation for durability and performance makes it a top contender in the riding mower market.
Top Page Image Contents