Removing & Reattaching Grass Catcher
A
B
D
C
Figure 15. Remove the Cover
A. | Cover | C. Hinge |
B. | Hinge Pin | D. Hair Pin Clip |
A |
Figure 16. Remove the Bags
A. Bags
REMOVING THE GRASS CATCHER
1.Remove the hair pin clips (D, Figure 15) and hinge pins (B) and remove the cover (A).
2.Remove the bags (A, Figure 16) by lifting them off their hooks. Empty any grass out the bags.
3.Remove the long hitch pin (C, Figure 17, non
4.Lift the front and back plate assembly off the spacers or pins (See Figure 18).
A | B |
| C |
| D |
Figure 17. Install Side Brackets
A. | Hair Pin Clip | C. Hitch Pin |
B. | Back Plate | D. Lower Spacer |
|
|
|
|
|
|
Figure 18. Front & Back Plate Assembly
WARNING
OPERATION WITHOUT TURBO & CATCHER
For operation without turbo, the mower deflector MUST be properly installed in the down position and retained by the spring latch (see turbo operator’s manual).
9