Initial Collector Assembly - All Models
| E | D |
A | B | E |
|
| |
C |
| G |
|
| |
F | H |
|
|
|
Figure 6. Install LH Discharge Back Plate
A.Back Plate
B.Front Plate
C.5/16-18 Nuts & Lockwashers
D.5/16-18 x 3/4 Carriage Bolts
E.5/16-18 x 1-1/4 Carriage Bolts
F.Locknut, 5/16-18
G.5/16-18 x 1 Capscrew
H.Cover Plate
INITIAL INSTALLATION & ASSEMBLY
Assemble Front and Back Plate
G |
| E | D |
A | B |
| |
|
| ||
H |
|
|
|
F |
|
|
|
|
|
| E |
|
| C |
|
Figure 7. Install RH Discharge Back Plate
A.Back Plate
B.Front Plate
C.5/16-18 Nuts & Lockwashers
D.5/16-18 x 3/4 Carriage Bolts
E.5/16-18 x 1-1/4 Carriage Bolts
F.Locknut, 5/16-18
G.5/16-18 x 1 Capscrew
H.Cover Plate
1.For units with left side discharge use the set of holes on the right side of the back plate. For units with right side discharge use the set of holes on the left side of the back plate. Attach the back plate (A, Figure 6 & 7) to the front plate (B) using carriage bolts, lock- washers, and nuts. Use two
2.For units with left side discharge the cover plate mounts to the right side of the back plate. For units with right side discharge the cover plate mounts to the left side of the back plate. Install the cover plate (H, Figure 6 & 7) on the back plate (A). Secure with four
6