Snapper 1725580, 1694389 manual Reattaching Grass Catcher, Models with out 3-Point Hitch

Page 11

Removing & Reattaching

REATTACHING

THE GRASS CATCHER

Models with out 3-Point Hitch

1.Set the front and back plate assembly on the pins (Figure 19).

2.Secure with the long hitch pin (C, Figure 19)

Models with 3-Point Hitch

1.Set the front and back plate assembly on the clevis pins (Figure 20).

2.Secure with the hitch pin (C, Figure 20).

B

A

D

C

Figure 19. Install Back Plate, without 3-Point Hitch

A.Hair Pin Clip

B.Back Plate

C.Hitch Pin

D.Lower Spacer

A

B

C

E

Lift arm must

be above lower

hole.

F

D

Figure 20. Install Back Plate, with 3-Point Hitch

A.Hair Pin Clip

B.Back Plate

C.Hitch Pin

D.Clevis Pin

E.Lift Arm

F.3-Point Hitch

10

Image 11

Contents OPERATOR’S Manual Clean Sweep Triple CatcherTable of Contents Decal Warning Do Not Open Cover Part Number Safety DecalsAttachment Decals After Operation Required AccessoriesBefore Operation Mowing with the CatcherInstall Back Plate Hair Pin Clip Hitch Pin Lower Spacer Install HitchHole Lift arm mustAssemble Front and Back Plate Initial Installation & AssemblyHoles for 54 Mowers Holes for 48 & 60 Mowers Assemble Tubes & DeflectorSee Figure Install CoverAssemble Catcher Bags Remove the Cover Hinge Hinge Pin Hair Pin Clip Removing the Grass CatcherModels with 3-Point Hitch Reattaching Grass CatcherModels with out 3-Point Hitch Bags Back Plate Hardware Identification & Torque Specifications