Snapper 1700, 2700, 400 manual Dashboard Display & Functions, Volt Power Outlet, Display Items

Page 15

Dashboard Display & Functions

Display Items

Refer to Figure 3.

A. FUEL LEVEL

Indicates the amount of fuel in the fuel tank. Left is empty; right is full.

B. HOUR METER / CLOCK / SERVICE INDICATOR

Displays the clock, hour meter, and maintenance reminder.

C. SELECT BUTTON

Used to set the clock and reset the maintenance reminder.

D. SET BUTTON

Used to set the clock and reset the maintenance reminder.

E. PTO LIGHT

Indicates the PTO switch is in the ON position.

F. CRUISE CONTROL LIGHT

Indicates that the cruise control is engaged.

G. LOW OIL PRESSURE LIGHT

Indicates that the engine oil pressure is low. The light will turn on when the tractor is first started and then go out. IF THIS LIGHT TURNS ON WHILE THE TRACTOR IS IN USE, TURN THE ENGINE OFF IMMEDIATELY. Contact your authorized dealer for service.

H. LOW VOLTAGE LIGHT

Indicates that the electrical system voltage is low. The light will turn on when the tractor is first started and then go out. IF THIS LIGHT TURNS ON WHILE THE TRAC-

TOR IS IN USE, TURN THE ENGINE OFF IMMEDIATE- LY. Contact your authorized dealer for service.

Features & Controls

 

A

 

B

 

 

 

D

 

 

 

C

 

Cruise

 

PTO

H

G

F

E

Figure 3. Dashboard Display - Select Models

Functions

DASHBOARD DISPLAY MODELS (SEE FIGURE 3)

Display Total Running Hours - When the key switch is first turned to the RUN position, all warning indicators will light and the total running hours will be displayed. Be sure all lights are functioning.

Display PTO Hours - Turn the key OFF, engage the PTO, and turn the key to RUN (engine off).

Set the Clock - Start the engine, leave the engine run- ning. Depress the select button (C) for three (3) seconds and release. Depress set button and HOLD to advance time. Depress select button to select minutes. Depress and HOLD set button (D) to advance time. Leave alone for 5 seconds and clock will activate. Shut off engine.

Demonstration Mode - With the engine off, hold down the set button (D) and turn the key switch to RUN.

Maintenance Reminder - A maintenance reminder will display in the information window (B) after the first 5 hours of operation, and then after every 50 hours. The reminder will automatically reset after 5 hours. The reminder can be manually reset by turning the key switch from OFF to RUN (with engine off) and then depressing the set (D) and select (C) buttons simultaneously for 5 seconds.

12 Volt Power Outlet

(Select Models)

CAUTION

Avoid Injury. Safe operation requires your full attention. Do not wear radio or music headphones while operating machine.

The 12-volt accessory plug is located in the left side pod (D, Figure 1). It can be used to power small electronic devices. The accessory must be rated at 9 amps or less.

Note: Operating a 12-volt accessory, especially with the engine at idle, may cause battery discharge. When not using the accessory plug it must be covered with the rub- ber plug to prevent moisture from causing a short circuit. Entrance of water into plug can cause a short circuit.

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 1735106 23HP Hydro Tractors Mower Decks25HP Hydro Tractors 27HP Hydro TractorsPage Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationIgnition System Safe Handling of Gasoline Service & MaintenanceOnly Identification NumbersNorth American CE ModelsDecal Cutting Height Safety DecalsSafety Decals Decal Operating Instructions, Models Decal Cutting HeightSafety Icons CE Safety IconsHeadlights Control FunctionsThrottle Control ChokeFeatures & Controls Attachment Lift Control Lever What is Automatic Controlled Traction?Parking Brake Function Automatic Controlled Traction w/o 4WDFunctions Volt Power OutletDashboard Display & Functions Display ItemsGeneral Operating Safety Operational Safety ChecksAdding Fuel Driving The Tractor Operating the TractorStarting the Engine Stopping the Tractor & EngineMowing Mowing in ReverseAttachment Operation in Reverse Pushing the Tractor by Hand Adjusting Mower Cutting HeightRemoving the Mower Deck Mower Deck Removal & InstallationInstalling the Mower Deck Simplicity, Massey Ferguson or Agco ModelsUpper Hanger Upper Hole Lift Hook Lower Hole Long Hub Snapper ModelsPivoting Gauge Wheels Select Models Simplicity, Massey Ferguson and Agco ModelsMower Hitch Tractor Hitch Brackets Spring-Loaded Lever Snapper Models Storage Attaching a TrailerLift Variations When Using Attachments Hydraulic Lift ModelsManual Lift Models Tall Grass Requires Incremental Cutting How and When to WaterFertilize & Aerate How High To Mow the GrassWhen and How Often to Mow Lawn Care & Mowing InformationProper Mowing Speed Before Every Spring Each Hours 100 250 Fall Use Regular MaintenanceRegular Maintenance Size Battery MaintenanceCleaning the Battery and Cables Check Tire PressuresLubrication GreaseOil Arbor Lubrication Point Mower Lubrication PointsBlade Removal Servicing the Mower BlabesTransmission Identification Transmission MaintenanceK66 Maintenance K664 MaintenanceTransmission Oil Capacity Apx -1/2 qt 4.25 L K71 MaintenanceService Interval Every 5 Hours Service Interval After 50 Hrs, Then Every 250 HrsInternal Transmission Filter Service Filter Access Cap Troubleshooting Troubleshooting Adjustment, & ServiceTractor Troubleshooting Troubleshooting, Adjustment, & ServiceBattery Charging Seat AdjustmentManual Lift Assist Adjustment Thicker Spoke Faces Seat Steering Wheel AdjustmentSteering Gear Adjustment Brake AdjustmentMower Adjustments PTO Clutch AdjustmentGauge Wheels Select Models Transport Height & Ground Following Adjustment Select ModelsLeveling The Mower Side-to-Side, J-Hook Models Locknut Leveling The MowerGap Mower Belt Replacement44 & 50 PTO Belt Replacement To avoid damaging belts, do not PRYArbor Drive Belt Replacement K71 23 HP* Briggs & Stratton25 HP* Kohler 27 HP* KohlerTechnical Manuals Replacement PartsMaintenance Items Optional Accessories

1700, 2700, 400 specifications

The Snapper series of mowers, including the Snapper 1700, 2700, and 400 models, represents a blend of power, efficiency, and innovative technology designed for lawn care enthusiasts and professionals alike. Each model offers unique features tailored to meet diverse mowing needs, ensuring top performance and ease of use.

The Snapper 1700 is ideal for residential yards and smaller properties. It is equipped with a reliable engine that delivers smooth, consistent power to tackle various grass types. The mower features a compact design, making it easy to maneuver around obstacles such as flower beds and trees. One of its standout attributes is the innovative easy-to-use height adjustment mechanism, allowing users to effortlessly change cutting heights to best suit their lawn conditions. Additionally, the Snapper 1700 boasts a robust cutting deck that ensures an even cut, resulting in a professional-grade finish.

The Snapper 2700 is a step up from the 1700, designed for users who require more power and capacity. This model comes with a larger cutting width, allowing for quicker mowing of expansive lawns. Enhanced features include an advanced mower deck technology that optimizes grass clipping discharge, helps to reduce clumping, and improves overall efficiency. The Snapper 2700 also incorporates ergonomic controls, providing comfort during prolonged use, and its durable construction ensures longevity. Furthermore, its rear-wheel drive system enhances traction, particularly on uneven terrain.

For those managing larger properties or commercial landscapes, the Snapper 400 offers premium performance and advanced technology. This model features a high-powered engine for maximum cutting performance, even in challenging conditions. The Snapper 400 is equipped with an intuitive digital display, providing essential information such as battery life and maintenance reminders, ensuring optimal performance over time. The mower's heavy-duty frame and reinforced deck enhance durability, making it suitable for rigorous tasks. It also boasts an innovative mulching capability, enabling users to finely chop grass clippings and return them to the soil as nutrient-rich mulch.

In summary, the Snapper 1700, 2700, and 400 models cater to a wide range of lawn care needs, from small yards to expansive landscapes. Each model combines innovative features, advanced technology, and durable construction, making them reliable choices for homeowners and professionals seeking superior mowing solutions.
Top Page Image Contents