Snapper 1700, 2700, 400 23 HP* Briggs & Stratton, 25 HP* Kohler, 27 HP* Kohler, K71, K664

Page 47

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

*The power ratings for an individual engine model are initially developed by starting with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) (Revision 2002–05). Given both the wide array of products on which our engines are placed, and the variety of environmental issues applicable to operating the equipment, it may be that the engine you have purchased will not develop the rated horsepower when used in a piece of power equipment (actual “on–site” power). This difference is due to a variety of factors including, but not lim- ited to, the following: differences in altitude, temperature, barometric pressure, humidity, fuel, engine lubrication, max- imum governed engine speed, individual engine to engine variability, design of the particular piece of power equip- ment, the manner in which the engine is operated, engine run–in to reduce friction and clean out of combustion chambers, adjustments to the valves and carburetor, and other factors. The power ratings may also be adjusted based on comparisons to other similar engines utilized in similar applications, and will therefore not necessarily match the values derived using the foregoing codes.

ENGINE:

23 HP* Briggs & Stratton

Make

Briggs & Stratton

Model

Vanguard

Horsepower

23

@ 3600 rpm

Displacement

38

Cu. in (622 cc)

Electrical System

12

Volt, 16 amp. Alternator, Battery: 340 CCA

Oil Capacity

48

Oz. (1.4 L)

25 HP* Kohler

Make

Kohler

Model

Command, CV730S

Horsepower

25 @ 1800-3400 rpm +/- 75

Displacement

44.0 Cu. in (725 cc)

Electrical System

12 Volt, 15 amp. Alternator, Battery: 500 CCA

Oil Capacity

2 qt. (1.9 L)

27 HP* Kohler

Make

Kohler

Model

Command, CV740S

Horsepower

27 @ 1800-3400 rpm +/- 75

Displacement

44.0 Cu. in (725 cc)

Electrical System

12 Volt, 15 amp. Alternator, Battery: 500 CCA

Oil Capacity

2 qt. (1.9 L)

CHASSIS:

Prestige / 1800 / 2800 / GT & Conquest / 1700 / 2700 / YT Series

Fuel Tank Cap.

Capacity: 4.0 Gallons (15 L)

Rear Wheels

Tire Size: 24 x 12 -12

Rear Wheels

Inflation Pressure: 6-8 psi (,41-,55 bar)

Tire Size: 23 x 10.50 -12

Front Wheels

Inflation Pressure: 6-8 psi (,41-,55 bar)

Tire Size: 16 x 6.50-8

 

Inflation Press.: 15 psi (1.0 bar)

TRANSMISSIONS:

K71

Type

Hydrostatic Tuff Torq K71

Hydraulic Fluid

10w 30 Premium Engine Oil

Capacity

4.8 qt (4,6 L)

Speeds

Forward: 0-7.2 MPH (0-11.6 km/h)

@ 3400 rpm

Reverse: 0-4.5 MPH (0-7.2 km/h)

Continuous Torque

410 ft. lbs. (554 N.m.)

Output

 

Drawbar Rating

440 lbs. (200 Kg)

Maximum Weight

728 lbs. (330 Kg)

on Axle

 

K66

Type

Hydrostatic Tuff Torq K66

Hydraulic Fluid

10w 30 Premium Engine Oil

Capacity

2.6 qt (2,5 L)

Speeds

Forward: 0-5.8 MPH (9.3 km/h)

@ 3400 rpm

Reverse: 0-3.5 MPH (5.6 km/h)

Continuous Torque

310 ft. lbs. (419 N.m.)

Output

 

Drawbar Rating

440 lbs. (200 Kg)

Maximum Weight

697 lbs. (316 Kg)

on Axle

 

K664

Type

Hydrostatic Tuff Torq K664

Hydraulic Fluid

10w 50 Synthetic Engine Oil

Capacity

5.4 qt (5,11 L)

Speeds

Forward: 0-5.8 MPH (9.3 km/h)

@ 3400 rpm

Reverse: 0-3.5 MPH (5.6 km/h)

Continuous Torque

310 ft. lbs. (419 N.m.)

Output

 

Drawbar Rating

440 lbs. (200 Kg)

Maximum Weight

697 lbs. (316 Kg)

on Axle

 

DIMENSIONS:

Prestige / 1800 / 2800 / 500 Series

Overall Length

75” (190,5 cm)

Overall Width

41” (104 cm)

Height

At Top of Seat: 50” (127 cm)

Weight

 

Tractor

666 lbs. (302 kg)

44 & 50” Mower Deck

125 lbs. (57 kg)

54” Mower Deck

192 lbs. (87 kg)

Conquest / 1700 / 2700 / 400 Series

Overall Length

75” (190,5 cm)

Overall Width

39” (99 cm)

Height

At Top of Seat: 50” (127 cm)

Weight

 

Tractor

586 lbs. (266 kg)

44” Mower Deck

112 lbs. (51 kg)

50” Mower Deck

125 lbs. (57 kg)

45

Image 47
Contents 1735106 23HP Hydro Tractors Mower Decks25HP Hydro Tractors 27HP Hydro TractorsPage Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationIgnition System Safe Handling of Gasoline Service & MaintenanceOnly Identification NumbersNorth American CE ModelsDecal Cutting Height Safety DecalsSafety Decals Decal Operating Instructions, Models Decal Cutting HeightSafety Icons CE Safety IconsHeadlights Control FunctionsThrottle Control ChokeFeatures & Controls Attachment Lift Control Lever What is Automatic Controlled Traction?Parking Brake Function Automatic Controlled Traction w/o 4WDFunctions Volt Power OutletDashboard Display & Functions Display ItemsAdding Fuel General Operating SafetyOperational Safety Checks Driving The Tractor Operating the TractorStarting the Engine Stopping the Tractor & EngineAttachment Operation in Reverse MowingMowing in Reverse Pushing the Tractor by Hand Adjusting Mower Cutting HeightRemoving the Mower Deck Mower Deck Removal & InstallationInstalling the Mower Deck Simplicity, Massey Ferguson or Agco ModelsUpper Hanger Upper Hole Lift Hook Lower Hole Long Hub Snapper ModelsPivoting Gauge Wheels Select Models Simplicity, Massey Ferguson and Agco ModelsMower Hitch Tractor Hitch Brackets Spring-Loaded Lever Snapper Models Storage Attaching a TrailerManual Lift Models Lift Variations When Using AttachmentsHydraulic Lift Models Tall Grass Requires Incremental Cutting How and When to WaterFertilize & Aerate How High To Mow the GrassProper Mowing Speed When and How Often to MowLawn Care & Mowing Information Before Every Spring Each Hours 100 250 Fall Use Regular MaintenanceRegular Maintenance Size Battery MaintenanceCleaning the Battery and Cables Check Tire PressuresOil LubricationGrease Arbor Lubrication Point Mower Lubrication PointsBlade Removal Servicing the Mower BlabesTransmission Identification Transmission MaintenanceK66 Maintenance K664 MaintenanceTransmission Oil Capacity Apx -1/2 qt 4.25 L K71 MaintenanceService Interval Every 5 Hours Service Interval After 50 Hrs, Then Every 250 HrsInternal Transmission Filter Service Filter Access Cap Troubleshooting Troubleshooting Adjustment, & ServiceTractor Troubleshooting Troubleshooting, Adjustment, & ServiceManual Lift Assist Adjustment Battery ChargingSeat Adjustment Thicker Spoke Faces Seat Steering Wheel AdjustmentSteering Gear Adjustment Brake AdjustmentMower Adjustments PTO Clutch AdjustmentGauge Wheels Select Models Transport Height & Ground Following Adjustment Select ModelsLeveling The Mower Side-to-Side, J-Hook Models Locknut Leveling The MowerGap Mower Belt Replacement44 & 50 PTO Belt Replacement To avoid damaging belts, do not PRYArbor Drive Belt Replacement K71 23 HP* Briggs & Stratton25 HP* Kohler 27 HP* KohlerTechnical Manuals Replacement PartsMaintenance Items Optional Accessories

1700, 2700, 400 specifications

The Snapper series of mowers, including the Snapper 1700, 2700, and 400 models, represents a blend of power, efficiency, and innovative technology designed for lawn care enthusiasts and professionals alike. Each model offers unique features tailored to meet diverse mowing needs, ensuring top performance and ease of use.

The Snapper 1700 is ideal for residential yards and smaller properties. It is equipped with a reliable engine that delivers smooth, consistent power to tackle various grass types. The mower features a compact design, making it easy to maneuver around obstacles such as flower beds and trees. One of its standout attributes is the innovative easy-to-use height adjustment mechanism, allowing users to effortlessly change cutting heights to best suit their lawn conditions. Additionally, the Snapper 1700 boasts a robust cutting deck that ensures an even cut, resulting in a professional-grade finish.

The Snapper 2700 is a step up from the 1700, designed for users who require more power and capacity. This model comes with a larger cutting width, allowing for quicker mowing of expansive lawns. Enhanced features include an advanced mower deck technology that optimizes grass clipping discharge, helps to reduce clumping, and improves overall efficiency. The Snapper 2700 also incorporates ergonomic controls, providing comfort during prolonged use, and its durable construction ensures longevity. Furthermore, its rear-wheel drive system enhances traction, particularly on uneven terrain.

For those managing larger properties or commercial landscapes, the Snapper 400 offers premium performance and advanced technology. This model features a high-powered engine for maximum cutting performance, even in challenging conditions. The Snapper 400 is equipped with an intuitive digital display, providing essential information such as battery life and maintenance reminders, ensuring optimal performance over time. The mower's heavy-duty frame and reinforced deck enhance durability, making it suitable for rigorous tasks. It also boasts an innovative mulching capability, enabling users to finely chop grass clippings and return them to the soil as nutrient-rich mulch.

In summary, the Snapper 1700, 2700, and 400 models cater to a wide range of lawn care needs, from small yards to expansive landscapes. Each model combines innovative features, advanced technology, and durable construction, making them reliable choices for homeowners and professionals seeking superior mowing solutions.