Snapper CP215520HV Mower Blade Replacement, Standard Blade Wear Limit, Ninja Blade Wear Limit

Page 15

Maintenance (Continued)

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

Mower Blade Replacement

Standard Blade Wear Limit

1.Inspect the blade (Figure 20) frequently for signs of excessive wear or damage:

(A)New blade

(B)Wear limit (notch starts)

(C)Dangerous condition! Do not use on the mower! Replace with a new blade.

A

B

C

Figure 20: Standard blade wear limits

Ninja Blade Wear Limit

1.Inspect the blade (Figure 21) frequently for signs of excessive wear or damage:

(A)New blade

(B)Wear limit (cracks or notches begin to appear on

tip)

(C)Dangerous condition! Do not use on the mower! Replace with a new blade.

!

WARNING

!

DO NOT use a cutting blade that shows signs of excessive wear or damage. Refer to the Section entitled “MOWER BLADE REPLACEMENT” for proper blade inspection and service procedures.

A

B

C

Figure 21: Ninja blade wear limits

Blade Sharpening

1.Disconnect the spark plug wire and secure the end away from the plug.

2.Tilt the mower up on its rear wheels. Do not tilt the mower with the spark plug or carburetor down.

Important: Drain the fuel tank before tipping the mower. DO NOT tip the machine with the carburetor or spark plug down. Oil from the crankcase will saturate the air filter and cause the engine to be hard to start or not start at all. If contamination does occur, the air filter will have to be replaced.

3. Remove the blade (B, Figure 22).

Make sure that blade hub is seated between flanges

A

C

B

D

E

Figure 22: Removing the mower blade

Maintenance

13

Image 15
Contents Steel Deck Walk Mowers Commercial Models Series Engine Date of Purchase Retailer Retailers Phone Number EquipmentTable of Contents Preparation From Previous Column Protection for ChildrenSlope Operation PreparationOperation From Previous Column Maintenance and StorageSafe Handling of Gasoline From Previous OperationFeatures and Controls Features and ControlsOperation Pre-Start Check List Starting and OperationEngine and Blade Handle Height Adjustment OperationPropelling the Mower Cutting Height Adjustment Recycling OperationRemoving the Recycling Cover Installing the Grass Bag Adapter Installing the Discharge DeflectorInstalling the recycling plug Installing the Recycling PlugDumping the Grass Bag Installing the Grass BagChange Engine Oil Maintenance Maintenance IntroductionService After First 5 Hours Check Grease Level in TransmissionMaintenance Service PeriodicStorage Procedure Blade Sharpening Mower Blade ReplacementStandard Blade Wear Limit Ninja Blade Wear LimitWheel Drive Control Adjustment Self-Propelled Models Only Driven Disc Adjustment Driven and Drive Disc ServiceCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementProper driven disc adjustment Driven Disc Ring ReplacementReplacing the driven disc bearing Driven Disc Bearing ReplacementBelt Service Engine Drive Belt Replacement Stretch Type BeltsReplacing the Bearing On the Pulley End Of the Hex Shaft Procedure Transmission Poly-V Belt ReplacementMaintenance/Replacement Parts Service ScheduleProbable Cause Corrective Action TroubleshootingYear Limited Warranty Page Page Page Part Number Product Specifications Common Service Parts

CP215520HV specifications

The Snapper CP215520HV is an exceptional residential riding mower that combines power, performance, and versatility, catering to homeowners looking for an efficient way to maintain their lawns. This model features a robust 21.5-horsepower Briggs & Stratton engine, known for its reliability and ease of starting. The engine delivers ample power to handle various mowing conditions, making quick work of grassy terrains.

One of the standout features of the Snapper CP215520HV is its cutting deck. The 42-inch, fabricated steel deck provides a wide cutting path, which helps to reduce mowing time while ensuring a clean cut. The deck is designed with a washout port, making it easy for users to clean the underside and maintain optimal performance. This model also offers multiple cutting height adjustments, ranging from 1.5 to 4.5 inches. This versatility allows homeowners to tailor the mowing height to suit their lawn's needs and seasonal changes.

In terms of comfort and control, the Snapper CP215520HV is equipped with an ergonomic steering wheel and a comfortable high-back seat. The operator station is designed for ease of use, allowing for intuitive handling without fatigue during extended mowing sessions. The steering system features a tight turning radius, enabling easy maneuverability around gardens and landscaping features.

The mower is built with durability in mind, constructed from sturdy materials designed to withstand the rigors of regular use. The heavy-duty frame offers stability and longevity, ensuring that the mower remains a reliable partner for years. Additionally, the Snapper CP215520HV incorporates a hydrostatic transmission, providing smooth and responsive speed control without the need for shifting gears.

Safety features are also a priority with this model. The mower is equipped with an automatic engine shut-off function that activates when the operator leaves the seat, preventing potential accidents. Furthermore, the headlights improve visibility during early morning or late evening mowing tasks.

Overall, the Snapper CP215520HV is an impressive amalgamation of innovative technology, user-friendly features, and durable construction. Designed for both efficiency and comfort, it stands out as a top choice for homeowners seeking a dependable riding mower that can tackle residential lawns effectively. Whether users need to mow a small yard or a larger property, this model promises to deliver exceptional results.