Snapper CP215520HV specifications Protection for Children, Slope Operation, Preparation

Page 4

Operator Safety

!

Important Operator Safety Instructions

!

WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind and body and must not be under the influence of any substance, which might impair vision, dexterity or judgment. If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER, McDonough, Georgia 30253. Phone: (1-800-935-2967).

Protection for Children

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

1.KEEP children out of the mowing area and under the watchful care of a responsible adult other than the operator.

2.DO NOT allow children in yard when machine is operated and turn machine OFF if anyone enters the area.

3.DO NOT allow pre-teenage children to operate machine.

4.ALLOW only responsible adults & teenagers with mature judgment under close adult supervision to operate machine.

5.DO NOT pull mower backwards unless absolutely necessary. LOOK and SEE behind and down for children, pets and hazards before and while backing.

6.USE EXTRA CARE when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

Slope Operation

1.Slopes are a major factor related to slip and fall acci- dents, which can result in severe injury. All slopes require extra caution. If you feel uneasy on a slope, DO NOT mow it.

2.Mow across slopes, never up-and-down. Exercise extreme CAUTION when changing directions on slopes. DO NOT mow steep slopes or other areas where stability or traction is in doubt. Refer to the Slope Guide at the end of this manual.

3.Use extra care with grass catchers or other attachments; these affect the handling and the stability of the machine.

Preparation

1.Read, understand, and follow instructions and warnings in this manual and on the mower, engine and attachments. Know the controls and the proper use of the mower before starting.

2.Only mature, responsible persons shall operate the machine and only after proper instruction.

3.Data indicates that operators age 60 and above, are involved in a large percentage of mower-related injuries. These operators should evaluate their ability to operate the mower safely enough to protect themselves and others from serious injury.

Preparation

(Continued From Previous Column)

4.Handle fuel with extra care. Fuels are flammable and vapors are explosive. Use only an approved fuel container. DO NOT remove fuel cap or add fuel with engine running. Add fuel outdoors only with engine stopped and cool. Clean spilled fuel and oil from machine. DO NOT smoke.

5.Check the area to be mowed and remove all objects such as toys, wire, rocks, limbs and other objects that could cause injury if thrown by blade or interfere with mowing. Also note the location of holes, stumps, and other possible hazards.

6.Keep people and pets out of the mowing area. Immediately, STOP Blade, Stop engine and Stop mower if anyone enters the area.

7.Check shields, deflectors, switches, blade controls and other safety devices frequently for proper operation and location.

8.Make sure all safety decals are clearly legible. Replace if damaged.

9.Protect yourself when mowing and wear safety glasses, a dust mask, long pants, and substantial footwear. DO NOT mow barefooted or with sandals.

10.Know how to STOP blade and engine quickly in preparation for emergencies.

11.Use extra care when loading or unloading the machine into a trailer or truck.

12.Check grass catcher components frequently for signs of wear or deterioration and replace as needed to prevent injury from thrown objects going through weak or torn spots.

Safe Handling of Gasoline

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

1.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

2.Use only an approved fuel container.

3.DO NOT remove fuel cap or add fuel with the engine running. Allow the engine to cool before refueling.

4.DO NOT refuel the machine indoors.

5.DO NOT store the machine or fuel container inside where there is an open flame, spark or pilot light such as on a water heater or other appliances.

2

www.snapper.com

Image 4
Contents Steel Deck Walk Mowers Commercial Models Series Date of Purchase Retailer Retailers Phone Number Equipment EngineTable of Contents Protection for Children Slope OperationPreparation Preparation From Previous ColumnMaintenance and Storage Safe Handling of Gasoline From PreviousOperation Operation From Previous ColumnFeatures and Controls Features and ControlsStarting and Operation Operation Pre-Start Check ListEngine and Blade Operation Handle Height AdjustmentPropelling the Mower Recycling Operation Cutting Height AdjustmentRemoving the Recycling Cover Installing the Discharge Deflector Installing the Grass Bag AdapterInstalling the Recycling Plug Installing the recycling plugInstalling the Grass Bag Dumping the Grass BagMaintenance Maintenance Introduction Service After First 5 HoursCheck Grease Level in Transmission Change Engine OilService Periodic MaintenanceStorage Procedure Mower Blade Replacement Standard Blade Wear LimitNinja Blade Wear Limit Blade SharpeningWheel Drive Control Adjustment Self-Propelled Models Only Driven and Drive Disc Service Cleaning Drive Disc & Driven DiscDrive Spring Repair/Replacement Driven Disc AdjustmentDriven Disc Ring Replacement Proper driven disc adjustmentDriven Disc Bearing Replacement Replacing the driven disc bearingEngine Drive Belt Replacement Stretch Type Belts Belt ServiceReplacing the Bearing On the Pulley End Of the Hex Shaft Transmission Poly-V Belt Replacement ProcedureService Schedule Maintenance/Replacement PartsTroubleshooting Probable Cause Corrective ActionYear Limited Warranty Page Page Page Product Specifications Common Service Parts Part Number

CP215520HV specifications

The Snapper CP215520HV is an exceptional residential riding mower that combines power, performance, and versatility, catering to homeowners looking for an efficient way to maintain their lawns. This model features a robust 21.5-horsepower Briggs & Stratton engine, known for its reliability and ease of starting. The engine delivers ample power to handle various mowing conditions, making quick work of grassy terrains.

One of the standout features of the Snapper CP215520HV is its cutting deck. The 42-inch, fabricated steel deck provides a wide cutting path, which helps to reduce mowing time while ensuring a clean cut. The deck is designed with a washout port, making it easy for users to clean the underside and maintain optimal performance. This model also offers multiple cutting height adjustments, ranging from 1.5 to 4.5 inches. This versatility allows homeowners to tailor the mowing height to suit their lawn's needs and seasonal changes.

In terms of comfort and control, the Snapper CP215520HV is equipped with an ergonomic steering wheel and a comfortable high-back seat. The operator station is designed for ease of use, allowing for intuitive handling without fatigue during extended mowing sessions. The steering system features a tight turning radius, enabling easy maneuverability around gardens and landscaping features.

The mower is built with durability in mind, constructed from sturdy materials designed to withstand the rigors of regular use. The heavy-duty frame offers stability and longevity, ensuring that the mower remains a reliable partner for years. Additionally, the Snapper CP215520HV incorporates a hydrostatic transmission, providing smooth and responsive speed control without the need for shifting gears.

Safety features are also a priority with this model. The mower is equipped with an automatic engine shut-off function that activates when the operator leaves the seat, preventing potential accidents. Furthermore, the headlights improve visibility during early morning or late evening mowing tasks.

Overall, the Snapper CP215520HV is an impressive amalgamation of innovative technology, user-friendly features, and durable construction. Designed for both efficiency and comfort, it stands out as a top choice for homeowners seeking a dependable riding mower that can tackle residential lawns effectively. Whether users need to mow a small yard or a larger property, this model promises to deliver exceptional results.