Snapper CP215520HV specifications Wheel Drive Control Adjustment Self-Propelled Models Only

Page 16

Maintenance (Continued)

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

Blade Sharpening (Continued)

4.Sharpen the blade on a grinding wheel at an angle of 22 to 28 degrees (B, Figure 23). DO NOT sharpen the blade beyond the original cutting edge (A).

Do not sharpen beyond original cutting edge

22-280

G

D

F

D

A

B

C

E

A

C

Maintenance

B

End view of blade assembly

A

Figure 23: Sharpening the mower blade

5.Check blade for balance. If necessary, correct balance by grinding heavy end of blade.

6.Reinstall blade (B, Figure 22). Note the correct assembly order:

(A)Blade hub

(B)Blade

(C)Blade flange (facing up)

(D)Cone washer (concave side up)

(E)Capscrew

7.Check torque of blade retaining cap screw. Recommended torque should be 40 ft. lbs.

Figure 24: Wheel drive control adjustment

2.To adjust, unhook the upper spring (D) from the cable eye and rotate the spring in the direction required to extend or shorten the spring length.

3.Rehook the upper spring to the cable eye and check clearance. Repeat the procedure if required.

Note: The vinyl spring cover (B) should be kept over the spring at all times except for adjustments.

4.If the wheel drive control fails to return quickly to the “OFF” position when released, check for binding at the cable holdings located on the side of the right handle. The upper clip should be located 2” below the upper knob; the lower clip should be 4” above the lower knob. The cable should slide freely with the clips installed at these locations.

Wheel Drive Control Adjustment (Self-Propelled Models Only)

1.The wheel drive control is properly adjusted when there is 1/16” to 1/8” clearance (G, Figure 24) between the inside of the spring hook (E) and the inside of the clutch cable eye (C) with the wheel drive control released.

14

www.snapper.com

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Steel Deck Walk Mowers Commercial Models Series Date of Purchase Retailer Retailers Phone Number Equipment EngineTable of Contents Protection for Children Slope OperationPreparation Preparation From Previous ColumnMaintenance and Storage Safe Handling of Gasoline From PreviousOperation Operation From Previous ColumnFeatures and Controls Features and ControlsStarting and Operation Operation Pre-Start Check ListEngine and Blade Operation Handle Height AdjustmentPropelling the Mower Recycling Operation Cutting Height AdjustmentRemoving the Recycling Cover Installing the Discharge Deflector Installing the Grass Bag AdapterInstalling the Recycling Plug Installing the recycling plugInstalling the Grass Bag Dumping the Grass BagMaintenance Maintenance Introduction Service After First 5 HoursCheck Grease Level in Transmission Change Engine OilService Periodic MaintenanceStorage Procedure Mower Blade Replacement Standard Blade Wear LimitNinja Blade Wear Limit Blade SharpeningWheel Drive Control Adjustment Self-Propelled Models Only Driven and Drive Disc Service Cleaning Drive Disc & Driven DiscDrive Spring Repair/Replacement Driven Disc AdjustmentDriven Disc Ring Replacement Proper driven disc adjustmentDriven Disc Bearing Replacement Replacing the driven disc bearingEngine Drive Belt Replacement Stretch Type Belts Belt ServiceReplacing the Bearing On the Pulley End Of the Hex Shaft Transmission Poly-V Belt Replacement ProcedureService Schedule Maintenance/Replacement PartsTroubleshooting Probable Cause Corrective ActionYear Limited Warranty Page Page Page Product Specifications Common Service Parts Part Number

CP215520HV specifications

The Snapper CP215520HV is an exceptional residential riding mower that combines power, performance, and versatility, catering to homeowners looking for an efficient way to maintain their lawns. This model features a robust 21.5-horsepower Briggs & Stratton engine, known for its reliability and ease of starting. The engine delivers ample power to handle various mowing conditions, making quick work of grassy terrains.

One of the standout features of the Snapper CP215520HV is its cutting deck. The 42-inch, fabricated steel deck provides a wide cutting path, which helps to reduce mowing time while ensuring a clean cut. The deck is designed with a washout port, making it easy for users to clean the underside and maintain optimal performance. This model also offers multiple cutting height adjustments, ranging from 1.5 to 4.5 inches. This versatility allows homeowners to tailor the mowing height to suit their lawn's needs and seasonal changes.

In terms of comfort and control, the Snapper CP215520HV is equipped with an ergonomic steering wheel and a comfortable high-back seat. The operator station is designed for ease of use, allowing for intuitive handling without fatigue during extended mowing sessions. The steering system features a tight turning radius, enabling easy maneuverability around gardens and landscaping features.

The mower is built with durability in mind, constructed from sturdy materials designed to withstand the rigors of regular use. The heavy-duty frame offers stability and longevity, ensuring that the mower remains a reliable partner for years. Additionally, the Snapper CP215520HV incorporates a hydrostatic transmission, providing smooth and responsive speed control without the need for shifting gears.

Safety features are also a priority with this model. The mower is equipped with an automatic engine shut-off function that activates when the operator leaves the seat, preventing potential accidents. Furthermore, the headlights improve visibility during early morning or late evening mowing tasks.

Overall, the Snapper CP215520HV is an impressive amalgamation of innovative technology, user-friendly features, and durable construction. Designed for both efficiency and comfort, it stands out as a top choice for homeowners seeking a dependable riding mower that can tackle residential lawns effectively. Whether users need to mow a small yard or a larger property, this model promises to deliver exceptional results.
Top Page Image Contents