Snapper CP215520HV specifications Driven and Drive Disc Service, Cleaning Drive Disc & Driven Disc

Page 17

Maintenance (Continued)

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

Driven and Drive Disc Service

If the mower does not propel itself properly, check for the following problems:

C

D

B

E

A

Figure 25: Wheel drive components

1.Grease on the drive disc (A, Figure 25) causing slippage.

2.Broken or disconnected drive spring (B).

3.Driven disc (C) is out of adjustment.

4.Driven disc rubber is worn - does not contact drive disc properly.

5.Worn Poly-V belt (D) or engine drive belt (E).

If any of the above (1 thru 5) are causing problems, service as follows:

Cleaning Drive Disc & Driven Disc

If oil or grease on the drive disc or driven disc is causing slippage, clean the discs as follows:

1.Wipe away any oil or grease with a clean cloth.

2.Use either an approved grease solvent or hot, soapy water to clean drive disc or driven disc.

3.Rinse components with clean water.

4.Dry components with a clean cloth.

Drive Spring Repair/Replacement

If the drive spring (A, Figure 26) is loose, reconnect. If the spring is broken, replace with a new spring.

Note: Use a pair of needle nose pliers to install the drive spring.

IMPORTANT: If the drive system continues slipping, refer to the Troubleshooting section.

A

Figure 26: Replacing the drive spring

Driven Disc Adjustment

If the drive disc and driven disc are clean and the mower drive is still slipping, adjust the driven disc as follows:

1.Move the ground speed control (A, Figure 27) into the ‘fast’ position.

C

Figure 27: The ground speed control

Maintenance

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Steel Deck Walk Mowers Commercial Models Series Engine Date of Purchase Retailer Retailers Phone Number EquipmentTable of Contents Slope Operation Protection for ChildrenPreparation Preparation From Previous ColumnSafe Handling of Gasoline From Previous Maintenance and StorageOperation Operation From Previous ColumnFeatures and Controls Features and ControlsEngine and Blade Operation Pre-Start Check ListStarting and Operation Propelling the Mower Handle Height AdjustmentOperation Removing the Recycling Cover Cutting Height AdjustmentRecycling Operation Installing the Grass Bag Adapter Installing the Discharge DeflectorInstalling the recycling plug Installing the Recycling PlugDumping the Grass Bag Installing the Grass BagService After First 5 Hours Maintenance Maintenance IntroductionCheck Grease Level in Transmission Change Engine OilStorage Procedure MaintenanceService Periodic Standard Blade Wear Limit Mower Blade ReplacementNinja Blade Wear Limit Blade SharpeningWheel Drive Control Adjustment Self-Propelled Models Only Cleaning Drive Disc & Driven Disc Driven and Drive Disc ServiceDrive Spring Repair/Replacement Driven Disc AdjustmentProper driven disc adjustment Driven Disc Ring ReplacementReplacing the driven disc bearing Driven Disc Bearing ReplacementReplacing the Bearing On the Pulley End Of the Hex Shaft Belt ServiceEngine Drive Belt Replacement Stretch Type Belts Procedure Transmission Poly-V Belt ReplacementMaintenance/Replacement Parts Service ScheduleProbable Cause Corrective Action TroubleshootingYear Limited Warranty Page Page Page Part Number Product Specifications Common Service Parts

CP215520HV specifications

The Snapper CP215520HV is an exceptional residential riding mower that combines power, performance, and versatility, catering to homeowners looking for an efficient way to maintain their lawns. This model features a robust 21.5-horsepower Briggs & Stratton engine, known for its reliability and ease of starting. The engine delivers ample power to handle various mowing conditions, making quick work of grassy terrains.

One of the standout features of the Snapper CP215520HV is its cutting deck. The 42-inch, fabricated steel deck provides a wide cutting path, which helps to reduce mowing time while ensuring a clean cut. The deck is designed with a washout port, making it easy for users to clean the underside and maintain optimal performance. This model also offers multiple cutting height adjustments, ranging from 1.5 to 4.5 inches. This versatility allows homeowners to tailor the mowing height to suit their lawn's needs and seasonal changes.

In terms of comfort and control, the Snapper CP215520HV is equipped with an ergonomic steering wheel and a comfortable high-back seat. The operator station is designed for ease of use, allowing for intuitive handling without fatigue during extended mowing sessions. The steering system features a tight turning radius, enabling easy maneuverability around gardens and landscaping features.

The mower is built with durability in mind, constructed from sturdy materials designed to withstand the rigors of regular use. The heavy-duty frame offers stability and longevity, ensuring that the mower remains a reliable partner for years. Additionally, the Snapper CP215520HV incorporates a hydrostatic transmission, providing smooth and responsive speed control without the need for shifting gears.

Safety features are also a priority with this model. The mower is equipped with an automatic engine shut-off function that activates when the operator leaves the seat, preventing potential accidents. Furthermore, the headlights improve visibility during early morning or late evening mowing tasks.

Overall, the Snapper CP215520HV is an impressive amalgamation of innovative technology, user-friendly features, and durable construction. Designed for both efficiency and comfort, it stands out as a top choice for homeowners seeking a dependable riding mower that can tackle residential lawns effectively. Whether users need to mow a small yard or a larger property, this model promises to deliver exceptional results.
Top Page Image Contents