Snapper CP215520HV specifications Operation, Handle Height Adjustment, Propelling the Mower

Page 8

Operation (Continued)

Starting and Operation (Continued)

Stopping

5.After the engine starts, turn off choke and allow a brief warm-up until the engine runs smooth before beginning mower operation.

NOTE: To stop the engine (and blade), release the blade control.

A

B

Operation

Figure 4: Starting the mower

Propelling the Mower

1.Start the engine. Refer to the Section entitled “Starting and Operation – Engine and Blade”.

2.Move the ground speed control (A, Figure 5) to the desired speed position.

3.Squeeze the wheel drive control (B) against the handle to engage the wheel drive and propel the mower forward. Forward speed can be adjusted while the mower is moving by changing the position of the ground speed control.

A

1.Stop forward motion of the mower by releasing the wheel drive control.

2.Stop the engine and blade by releasing the blade control.

Handle Height Adjustment

The height of the mower handle can be adjusted as follows:

1.Loosen the lower nuts (A, Figure 6) on each lower handle.

B

A

Figure 6: Adjusting the handle height

2.Move the handle assembly (B) up or down until the desired position is achieved.

3.Tighten the lower nuts on each lower handle to maintain the desired position.

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

B

Figure 5: Mower drive controls

6

www.snapper.com

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Steel Deck Walk Mowers Commercial Models Series Date of Purchase Retailer Retailers Phone Number Equipment EngineTable of Contents Protection for Children Slope OperationPreparation Preparation From Previous ColumnMaintenance and Storage Safe Handling of Gasoline From PreviousOperation Operation From Previous ColumnFeatures and Controls Features and ControlsEngine and Blade Operation Pre-Start Check ListStarting and Operation Propelling the Mower Handle Height AdjustmentOperation Removing the Recycling Cover Cutting Height AdjustmentRecycling Operation Installing the Discharge Deflector Installing the Grass Bag AdapterInstalling the Recycling Plug Installing the recycling plugInstalling the Grass Bag Dumping the Grass BagMaintenance Maintenance Introduction Service After First 5 HoursCheck Grease Level in Transmission Change Engine OilStorage Procedure MaintenanceService Periodic Mower Blade Replacement Standard Blade Wear LimitNinja Blade Wear Limit Blade SharpeningWheel Drive Control Adjustment Self-Propelled Models Only Driven and Drive Disc Service Cleaning Drive Disc & Driven DiscDrive Spring Repair/Replacement Driven Disc AdjustmentDriven Disc Ring Replacement Proper driven disc adjustmentDriven Disc Bearing Replacement Replacing the driven disc bearingReplacing the Bearing On the Pulley End Of the Hex Shaft Belt ServiceEngine Drive Belt Replacement Stretch Type Belts Transmission Poly-V Belt Replacement ProcedureService Schedule Maintenance/Replacement PartsTroubleshooting Probable Cause Corrective ActionYear Limited Warranty Page Page Page Product Specifications Common Service Parts Part Number

CP215520HV specifications

The Snapper CP215520HV is an exceptional residential riding mower that combines power, performance, and versatility, catering to homeowners looking for an efficient way to maintain their lawns. This model features a robust 21.5-horsepower Briggs & Stratton engine, known for its reliability and ease of starting. The engine delivers ample power to handle various mowing conditions, making quick work of grassy terrains.

One of the standout features of the Snapper CP215520HV is its cutting deck. The 42-inch, fabricated steel deck provides a wide cutting path, which helps to reduce mowing time while ensuring a clean cut. The deck is designed with a washout port, making it easy for users to clean the underside and maintain optimal performance. This model also offers multiple cutting height adjustments, ranging from 1.5 to 4.5 inches. This versatility allows homeowners to tailor the mowing height to suit their lawn's needs and seasonal changes.

In terms of comfort and control, the Snapper CP215520HV is equipped with an ergonomic steering wheel and a comfortable high-back seat. The operator station is designed for ease of use, allowing for intuitive handling without fatigue during extended mowing sessions. The steering system features a tight turning radius, enabling easy maneuverability around gardens and landscaping features.

The mower is built with durability in mind, constructed from sturdy materials designed to withstand the rigors of regular use. The heavy-duty frame offers stability and longevity, ensuring that the mower remains a reliable partner for years. Additionally, the Snapper CP215520HV incorporates a hydrostatic transmission, providing smooth and responsive speed control without the need for shifting gears.

Safety features are also a priority with this model. The mower is equipped with an automatic engine shut-off function that activates when the operator leaves the seat, preventing potential accidents. Furthermore, the headlights improve visibility during early morning or late evening mowing tasks.

Overall, the Snapper CP215520HV is an impressive amalgamation of innovative technology, user-friendly features, and durable construction. Designed for both efficiency and comfort, it stands out as a top choice for homeowners seeking a dependable riding mower that can tackle residential lawns effectively. Whether users need to mow a small yard or a larger property, this model promises to deliver exceptional results.
Top Page Image Contents