Snapper E281320BE, E331520KVE Starting & Operation 2.3.3. Mower Blade, Wheel Drive

Page 11

Section 2 - OPERATING INSTRUCTIONS

WARNING

Once blade is disengaged, it should come to a complete stop in 3 seconds or less. If the blade continues to rotate after 3 seconds, the blade brake must be adjusted. Refer to Section “BLADE BRAKE ADJUSTMENT” for adjustment procedures or return machine to an authorized SNAPPER dealer for adjustment. DO NOT CONTINUE to operate machine until blade brake is adjusted and functioning properly.

2.3STARTING & OPERATION 2.3.3. MOWER BLADE

1.With engine running, move engine speed control to the “FAST” position.

2.Move blade lever forward to the “ON” position, then depress blade pedals to hold blade lever in the “ON” position. See Figure 2.10.

IMPORTANT: You cannot engage the blade lever if the blade pedal is depressed first.

BLADE LEVER SHOWN

IN “ON” POSITION

BLADE PEDAL

SHOWN

DEPRESSED

FIGURE 2.10

2.3.4. WHEEL DRIVE

1.With engine running, adjust engine speed control to “FAST” position.

2.Depress clutch/brake pedal. See Figure 2.11.

3.Place transmission shift lever in the notch for 1st speed. See Figure 2.12.

4.Release clutch/brake pedal to start desired direction.

5.During forward motion, the transmission shift lever may be placed in any desired forward speed without depressing the clutch/brake pedal.

NOTE: For best cutting results, move the transmission shift lever into a slow forward speed and the engine speed control to a fast position. This combination will allow the mower blades to lift the grass while cutting smoothly and evenly.

WARNING

DO NOT operate blades in reverse. STOP BLADES. LOOK and SEE behind and down for children, pets and hazards before and while backing.

DEPRESS

CLUTCH/BRAKE PEDAL

FIGURE 2.11

THERE ARE FIVE

DIFFERENT FORWARD

GROUND SPEEDS AND

ONE REVERSE GROUND

SPEED

SHIFT LEVER SHOWN IN

NEUTRAL POSITION

FIGURE 2.12

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Manual No -3553 I.R /29/00 European Rear Engine Riding Mower SeriesImportant Safety Instructions Operation Table of Contents Nomenclature IntroductionFamiliarization Decals / Symbols Transmission Shift Lever Symbols Rabbit PRE-START Check List OPERATOR’S Seat Adjustment 2.2.1. Front to Rear AdjustmentOn Next Starting & Operation Engine Electric StartEngine Manual Start Starting & OperationEngine Electric Start Wheel Drive Starting & Operation 2.3.3. Mower BladeMower Blade Stopping ENGINE, Wheel DRIVE, Blade 2.4.1. EngineDo not park the machine on slopes Cutting Height AdjustmentStopping ENGINE, Wheel DRIVE, Blade 2.4.4. Park Brake Reverse Lockout Mechanism Override Reverse Lockout MechanismChange Engine OIL Service After First 5 HoursService Engine AIR Cleaner Check Mower Blade Interlock System Service After First 5 Hours 3.2.4. Check Blade Drive BeltService Brake / Park Brake Blade BrakeLubrication Grease Fittings Service Every 25 Operating HoursBattery Fluid Level Clean Mower DeckRear Axle Bearing Lubrication Front Wheel Bearing LubricationStorage OUT of Season Service AnnuallyFuel Filter Every TWO YearsRemoving Fuel Tank Blade Brake Adjustment Engine Adjustments & RepairFront to Rear Levelness 30 Decks Mower Deck AdjustmentFront to Rear Levelness 28, & 33 Decks Wheel Brake Adjustment Adjustments & RepairChain Case Blade Sharpening Mower Blade Replacement 4.4.1. Blade Wear LimitsBelt Removal Blade Drive Belt ReplacementBelt Replacement Battery Installation Battery Battery RemovalNEW Battery Preparation 1. Remove battery from carton Battery ServiceBattery Storage Battery TestingSnapper Rear Engine Rider Accessories Stop Problem Probable Cause Corrective ActionImproperly Loss Of TractionBlades Not Cutting Cutting GrassVibration Max Less Than Subject Service ReferencePower LWA To be Performed PagesMAINTENANCE/REPLACEMENT Parts Maintenance Parts Disclaimer of Warranty Year Limited WarrantyService Notes Service Notes Service Notes European Rear Engine Riding Mower Series

E281320BE, E331520KVE specifications

The Snapper E281320BE and E331520KVE are two robust lawn mowers that stand out in the market for their innovative features and advanced technologies. Both models are designed to provide an efficient and comfortable mowing experience, catering to the needs of homeowners and professionals alike.

Starting with the Snapper E281320BE, this model is powered by a reliable 21-inch steel cutting deck that ensures a clean and precise cut every time. Its 20-inch rear wheel drive allows for exceptional maneuverability, making it ideal for navigating tight spaces and uneven terrain. The E281320BE is equipped with a powerful 223cc engine, providing ample power for tackling thick grass and challenging landscapes. This model also offers a three-in-one cutting capability, allowing users to choose between mulching, bagging, or side discharge modes, providing versatility for different mowing conditions.

On the other hand, the Snapper E331520KVE enhances performance with its 33-inch cutting deck, making it suitable for larger lawns while still maintaining excellent cutting efficiency. Featuring a strong 344cc engine, this mower delivers reliable power that can handle heavier workloads. Equipped with a high-back seat and ergonomic controls, the E331520KVE ensures comfortable operation over extended periods, reducing fatigue for the user.

Both models boast Snapper’s innovative Toro-branded SmartChoke technology, which simplifies starting and improves engine performance in various weather conditions. Users will appreciate the easy-to-use height adjustment lever, allowing for quick changes in cutting height to achieve the desired grass length.

The durability of these mowers is reinforced by their steel frame construction, ensuring they withstand the rigours of regular use. Additionally, Snapper has integrated features like a reinforced front bumper and heavy-duty wheels, enhancing stability and traction during operation.

In terms of maintenance, both models are designed for convenience, with easy access to the engine and other components, allowing for straightforward servicing. The Snapper E281320BE and E331520KVE also come with a solid warranty, showcasing the manufacturer’s commitment to quality.

In summary, Snapper's E281320BE and E331520KVE lawn mowers are exceptional choices for those seeking reliability, efficiency, and innovative features in their mowing equipment. With their powerful engines, versatile cutting options, and user-friendly designs, these mowers are set to meet a wide range of lawn care needs.
Top Page Image Contents