Snapper YZ18425BVE, YZ20485BVE Cutting Height Adjustment, Engine Must not Start if

Page 10

Section 2 - OPERATING INSTRUCTIONS

2.3.5. CUTTING HEIGHT ADJUSTMENT

This machine has seven different cutting height positions. IMPORTANT: When positioning the cutting deck into a higher cutting position, pull up on the deck lift handle only, it is not necessary to pull up on the release lever at the same time. Use the release lever when moving deck cutting height to a lower cutting position.

1.Grasp both handles together to disengage latch.

2.Raise or lower handles to desired height.

3.Release lower handle to engage latch. See Figure 2.9.

DECK LIFT

DECK LIFT HANDLE SHOWN

HANDLE

IN HIGHEST NOTCH.

RELEASE

LEVER

DETENT

CONNECTING BAR OMITTED IN THISPLATE VIEW FOR CLARITY

FIGURE 2.9

2.4SAFETY INTERLOCK SYSTEM CHECKS This machine is equipped with an electrical safety interlock system that is provided for the safety of the operator and others. All safety devices must be in place and functioning properly before operating the machine. Perform the following interlock system checks periodically during the operating season. Contact your authorized Snapper dealer if you have questions.

WARNING

DO NOT operate machine if any safety interlock or safety device is not in place and functioning properly. DO NOT attempt to defeat, modify or remove any safety device.

ENGINE MUST NOT START IF:

1)Park Brake not in engaged position, OR,

2)Blade Switch in the “ON” blades engaged position.

ENGINE SHOULD START IF:

1)Blade Switch in the “OFF” blades disengaged position AND,

2)Park Brake in engaged position.

ENGINE MUST BEGIN TO STOP IF:

1)Operator rises off of seat with Blade Switch in “ON” blades engaged position OR,

2)Operator rises off of seat with Park Brake not in engaged position.

IMPORTANT: Engine will continue to run if Operator becomes seated prior to engine coming to a complete stop. To restart the blades, first move the Blade Switch to the “OFF” position and then back to the “ON” position. After coming to a complete stop, the blade switch must be moved to the “OFF” position and the Park Brake engaged before engine can be restarted. Engine and blades must come to a complete stop within 5 seconds after the operator rises off the seat or the blade switch is moved to the “OFF” position.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Scrambler Model Number ExplanationProtection Against Tipovers Protection for ChildrenPreparation Safe Handling of Gasoline OperationMaintenance Table of Contents Introduction NomenclatureOperating Instructions PRE-START Check ListStarting & Operation Engine Electric Start On NextWheel Drive Mower Blade StoppingEngine Mower BladeEngine should Start if Cutting Height AdjustmentEngine Must not Start if Engine Must Begin to Stop ifCheck Mower Blade Service After First 5 HoursChange Engine OIL Twin & Triple Blade DeckService Every 25 Operating Hours Check Transaxle Drive BeltService Every 25 Operating Hours 3.3.1. Engine Mower ComponentsScrambler Lubrication Mower Deck Linkage LubricationFront Wheel Bearings Service Annually Storage OUT of SeasonBelt Replacement Engine Adjustments & RepairMower Drive Belt Adjustment Belt RemovalRefer to Section MAINTENANCE/REPLACEMENT Parts Blade BrakeHairpin Lift ARM Single Blade Deck Front or Rear View of DeckTwin Blade Deck Deck ShownWheel Brake Adjustment Numbers refer to Section Maintenance /REPLACEMENT Parts Mower Blade Replacement 4.3.1. Blade Wear LimitsBlade Replacement Blade SharpeningBattery Service Battery Battery RemovalBattery Installation 1. Slide battery into battery cradle Battery StorageBattery Condition Chart Battery TestingTrouble Shooting on Next Problem Probable CauseCorrective Action MAINTENANCE/REPLACEMENT Parts Loss Of Traction100 Service Performed EachUSE HRS Season Year Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Scrambler Hydro Drive Series

YZ18425BVE, YZ20485BVE specifications

The Snapper YZ18425BVE and YZ20485BVE represent a significant advancement in outdoor power equipment, specifically designed for those who seek performance, reliability, and efficiency in their lawn care endeavors. These models combine cutting-edge technology and user-friendly features, making them ideal choices for both residential and commercial applications.

At the heart of both models is a robust engine designed to deliver exceptional power. The YZ18425BVE features an 18 horsepower engine, while the YZ20485BVE boasts a more powerful 20 horsepower variant. This substantial power allows for swift and efficient mowing, easily cutting through thick grass and tackling uneven terrains. Both engines are engineered with fuel efficiency in mind, enabling longer operational hours on a single tank and reducing the frequency of refueling.

One of the standout features of the Snapper YZ series is its innovative cutting deck design. With a precise cutting width of 42 inches for the YZ18425BVE and 48 inches for the YZ20485BVE, these mowers provide a clean and consistent cut, ensuring an immaculate lawn. The deck is constructed for durability, featuring advanced materials that withstand the rigors of regular use while maintaining performance.

User comfort and control are paramount in the design of these models. Both mowers come equipped with an ergonomic seat and an intuitive control layout, allowing operators to maneuver with ease and precision. The YZ20485BVE also includes advanced suspension features that enhance the overall riding experience, reducing vibrations and increasing operator comfort during extended use.

In terms of safety, the Snapper YZ series prioritizes user protection. Key safety features include automatic blade shut-off systems and easy-to-reach controls that ensure operators can quickly respond to any situation. Additionally, these models are designed with stability in mind, featuring a wide wheelbase that improves traction and control on various terrains.

Both the YZ18425BVE and YZ20485BVE are equipped with easy maintenance features, such as accessible oil and air filters, allowing users to perform routine checks and servicing without hassle. This commitment to maintenance ease ensures that the mowers remain in peak condition for years of reliable service.

Overall, the Snapper YZ18425BVE and YZ20485BVE are exemplary choices for those looking for high-performance lawn mowers that combine power, efficiency, and user comfort.
Top Page Image Contents