Snapper YZ18425BVE, YZ20485BVE Service Every 25 Operating Hours 3.3.1. Engine, Mower Components

Page 13

Section 3 - MAINTENANCE

3.3SERVICE EVERY 25 OPERATING HOURS 3.3.1. ENGINE

5.Air Filter

c. Reinstall air cleaner cover. Insert tabs located on the engine cover into corresponding slots in air cleaner cover. IMPORTANT: The yellow tabs must be completely inserted into air cleaner cover or the compartment will not be completely sealed to prevent debris from entering into the carburetor.

a. 18 HP Engines: Change air filter. Pull up and rotate the air cleaner latch to remove cleaner cover. See Figure 3.4.

IMPORTANT: When cover is removed, you are viewing the carburetor side of the air filter, which will appear clean. Remove filter and pre-cleaner for inspection.

AIR CLEANER

LATCH

 

AIR CLEANER

FIGURE 3.4

COVER

b.Refer to engine owner's manual for cleaning and service instructions. Remove and clean engine air pre-cleaner. Remove and replace engine air cleaner. See Figure 3.5. Install pre-cleaner and air cleaner per engine owner’s manual.

AIR PRE-

CLEANER

AIR CLEANER

FIGURE 3.5

c.Reinstall air cleaner cover. Insert tabs located at the bottom of the cover into corresponding slots in engine cover. Position cover and engage latch over cover and rotate and push down to lock.

3.3.2.MOWER COMPONENTS

1. Mower Drive Belt

Check belt for proper tension. No adjustment required. Replace belt as needed.

2. Mower Blade

Check blade for sharpness, wear, damage, and torque. See the section on Mower Blade Replacement/Repair.

3. Mower Deck Levelness

Check mower deck for proper levelness. Adjust as required. See section on Mower Deck Adjustment - Levelness.

WARNING

Lifting or letting down the machine unassisted can cause severe injury. Always have assistance from another person when supporting the weight of machine.

4.Cleaning Mower Deck

a.Close vent on fuel cap and make sure cap is tight. Close fuel valve in fuel line. Start engine and allow it to run until engine runs out of fuel.

b.Remove key from ignition switch.

c.Remove spark plug wire(s) and secure away from spark plug(s).

d.Carefully stand SCRAMBLER on rear bumper.

e.Clean underside of mower deck, removing all accumulation of grass clippings and debris.

f.Lower SCRAMBLER to ground. Clean top of deck, removing all grass clippings and debris.

5.Mower Blade Spindle - Lubrication

a.Lubricate spindle bearings with three shots of general purpose grease from grease gun. See Figure 3.6.

TOP VIEW OF 48” DECK

LUBRICATE

SPINDLE

BEARINGS

FIGURE 3.6

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model Number Explanation ScramblerProtection Against Tipovers Protection for ChildrenPreparation Operation Safe Handling of GasolineMaintenance Table of Contents Nomenclature IntroductionPRE-START Check List Operating InstructionsOn Next Starting & Operation Engine Electric StartEngine Mower Blade StoppingWheel Drive Mower BladeEngine Must not Start if Cutting Height AdjustmentEngine should Start if Engine Must Begin to Stop ifChange Engine OIL Service After First 5 HoursCheck Mower Blade Twin & Triple Blade DeckCheck Transaxle Drive Belt Service Every 25 Operating HoursMower Components Service Every 25 Operating Hours 3.3.1. EngineScrambler Lubrication Mower Deck Linkage LubricationFront Wheel Bearings Storage OUT of Season Service AnnuallyMower Drive Belt Adjustment Engine Adjustments & RepairBelt Replacement Belt RemovalBlade Brake Refer to Section MAINTENANCE/REPLACEMENT PartsHairpin Lift ARM Twin Blade Deck Front or Rear View of DeckSingle Blade Deck Deck ShownWheel Brake Adjustment Blade Replacement Mower Blade Replacement 4.3.1. Blade Wear LimitsNumbers refer to Section Maintenance /REPLACEMENT Parts Blade SharpeningBattery Installation 1. Slide battery into battery cradle Battery Battery RemovalBattery Service Battery StorageBattery Testing Battery Condition ChartTrouble Shooting on Next Problem Probable CauseCorrective Action Loss Of Traction MAINTENANCE/REPLACEMENT Parts100 Service Performed EachUSE HRS Season Disclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Scrambler Hydro Drive Series

YZ18425BVE, YZ20485BVE specifications

The Snapper YZ18425BVE and YZ20485BVE represent a significant advancement in outdoor power equipment, specifically designed for those who seek performance, reliability, and efficiency in their lawn care endeavors. These models combine cutting-edge technology and user-friendly features, making them ideal choices for both residential and commercial applications.

At the heart of both models is a robust engine designed to deliver exceptional power. The YZ18425BVE features an 18 horsepower engine, while the YZ20485BVE boasts a more powerful 20 horsepower variant. This substantial power allows for swift and efficient mowing, easily cutting through thick grass and tackling uneven terrains. Both engines are engineered with fuel efficiency in mind, enabling longer operational hours on a single tank and reducing the frequency of refueling.

One of the standout features of the Snapper YZ series is its innovative cutting deck design. With a precise cutting width of 42 inches for the YZ18425BVE and 48 inches for the YZ20485BVE, these mowers provide a clean and consistent cut, ensuring an immaculate lawn. The deck is constructed for durability, featuring advanced materials that withstand the rigors of regular use while maintaining performance.

User comfort and control are paramount in the design of these models. Both mowers come equipped with an ergonomic seat and an intuitive control layout, allowing operators to maneuver with ease and precision. The YZ20485BVE also includes advanced suspension features that enhance the overall riding experience, reducing vibrations and increasing operator comfort during extended use.

In terms of safety, the Snapper YZ series prioritizes user protection. Key safety features include automatic blade shut-off systems and easy-to-reach controls that ensure operators can quickly respond to any situation. Additionally, these models are designed with stability in mind, featuring a wide wheelbase that improves traction and control on various terrains.

Both the YZ18425BVE and YZ20485BVE are equipped with easy maintenance features, such as accessible oil and air filters, allowing users to perform routine checks and servicing without hassle. This commitment to maintenance ease ensures that the mowers remain in peak condition for years of reliable service.

Overall, the Snapper YZ18425BVE and YZ20485BVE are exemplary choices for those looking for high-performance lawn mowers that combine power, efficiency, and user comfort.
Top Page Image Contents