Snapper YZ18425BVE, YZ20485BVE Service Annually, Storage OUT of Season

Page 15

Section 3 – MAINTENANCE

3.4 SERVICE - ANNUALLY

Perform all maintenance as described in the maintenance schedule.

3.4.1. Engine

Service engine according to engine owner’s manual.

3.4.2. Air Filter

Refer to engine owner’s manual for service instructions.

3.4.3. Oil Filter

Refer to engine owner’s manual for service instructions.

3.4.4. Engine Oil

Refer to engine owner’s manual for service instructions.

3.4.5. Transaxle

IMPORTANT: DO NOT try to open reservoir cap at any time. The transaxle is maintenance free. The transaxle does not require any fluid or any service. If there is any problem: leakage, malfunction or etc. return the SCRAMBLER immediately to the nearest authorized Snapper dealer for service.

3.4.6. Fuel Filter

Service fuel filter as instructed below. Close fuel valve in fuel line. Run engine until engine runs out of fuel. Turn key to “OFF” position. Engine MUST be stopped and MUST be cold before removing filter. Perform filter change only when fuel line is empty.

1.Remove hose clamps from fuel filter.

2.Remove fuel lines from filter. Discard filter.

3.Install new fuel filter. Reinstall hose clamps. See Figure 3.8.

NEW FUEL

FILTER

HOSE CLAMPS

FIGURE 3.8

3.5 STORAGE (OUT OF SEASON)

If desired, the SCRAMBLER can be stored on the rear bumper. Perform the following procedures to insure the SCRAMBLER will operate properly when taken out of storage.

3.5.1.Thoroughly clean the SCRAMBLER by removing all grass clippings and debris.

3.5.2.Perform maintenance and lubrication as described in the previous sections.

3.5.3.Drain fuel from fuel tank into an approved container outdoors away from all sources of ignition.

3.5.4.Start engine and allow it to run until engine runs out of fuel. This allows the carburetor and fuel system to remain clean during storage.

3.5.5.Remove battery. Refer to Section

“BATTERY REMOVAL AND STORAGE”.

3.5.6.Close vent on fuel cap and fuel valve in fuel line. Remove key.

3.5.7.Carefully stand SCRAMBLER on rear bumper in desired location for storage.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Model Number Explanation ScramblerProtection for Children Protection Against TipoversPreparation Operation Safe Handling of GasolineMaintenance Table of Contents Nomenclature IntroductionPRE-START Check List Operating InstructionsOn Next Starting & Operation Engine Electric StartMower Blade Mower Blade StoppingEngine Wheel DriveEngine Must Begin to Stop if Cutting Height AdjustmentEngine Must not Start if Engine should Start ifTwin & Triple Blade Deck Service After First 5 HoursChange Engine OIL Check Mower BladeCheck Transaxle Drive Belt Service Every 25 Operating HoursMower Components Service Every 25 Operating Hours 3.3.1. EngineMower Deck Linkage Lubrication Scrambler LubricationFront Wheel Bearings Storage OUT of Season Service AnnuallyBelt Removal Engine Adjustments & RepairMower Drive Belt Adjustment Belt ReplacementBlade Brake Refer to Section MAINTENANCE/REPLACEMENT PartsHairpin Lift ARM Deck Shown Front or Rear View of DeckTwin Blade Deck Single Blade DeckWheel Brake Adjustment Blade Sharpening Mower Blade Replacement 4.3.1. Blade Wear LimitsBlade Replacement Numbers refer to Section Maintenance /REPLACEMENT PartsBattery Storage Battery Battery RemovalBattery Installation 1. Slide battery into battery cradle Battery ServiceBattery Testing Battery Condition ChartProblem Probable Cause Trouble Shooting on NextCorrective Action Loss Of Traction MAINTENANCE/REPLACEMENT PartsService Performed Each 100USE HRS Season Disclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Scrambler Hydro Drive Series

YZ18425BVE, YZ20485BVE specifications

The Snapper YZ18425BVE and YZ20485BVE represent a significant advancement in outdoor power equipment, specifically designed for those who seek performance, reliability, and efficiency in their lawn care endeavors. These models combine cutting-edge technology and user-friendly features, making them ideal choices for both residential and commercial applications.

At the heart of both models is a robust engine designed to deliver exceptional power. The YZ18425BVE features an 18 horsepower engine, while the YZ20485BVE boasts a more powerful 20 horsepower variant. This substantial power allows for swift and efficient mowing, easily cutting through thick grass and tackling uneven terrains. Both engines are engineered with fuel efficiency in mind, enabling longer operational hours on a single tank and reducing the frequency of refueling.

One of the standout features of the Snapper YZ series is its innovative cutting deck design. With a precise cutting width of 42 inches for the YZ18425BVE and 48 inches for the YZ20485BVE, these mowers provide a clean and consistent cut, ensuring an immaculate lawn. The deck is constructed for durability, featuring advanced materials that withstand the rigors of regular use while maintaining performance.

User comfort and control are paramount in the design of these models. Both mowers come equipped with an ergonomic seat and an intuitive control layout, allowing operators to maneuver with ease and precision. The YZ20485BVE also includes advanced suspension features that enhance the overall riding experience, reducing vibrations and increasing operator comfort during extended use.

In terms of safety, the Snapper YZ series prioritizes user protection. Key safety features include automatic blade shut-off systems and easy-to-reach controls that ensure operators can quickly respond to any situation. Additionally, these models are designed with stability in mind, featuring a wide wheelbase that improves traction and control on various terrains.

Both the YZ18425BVE and YZ20485BVE are equipped with easy maintenance features, such as accessible oil and air filters, allowing users to perform routine checks and servicing without hassle. This commitment to maintenance ease ensures that the mowers remain in peak condition for years of reliable service.

Overall, the Snapper YZ18425BVE and YZ20485BVE are exemplary choices for those looking for high-performance lawn mowers that combine power, efficiency, and user comfort.
Top Page Image Contents