2.Outdoor Minimum and Maximum Temperature and Humidity
The indoor weather station automatically stores the minimum and maximum outdoor temperature and humidity. The minimum and maximum values are updated automatically when a new minimum or maximum is recorded, or until manually reset.
a.From the normal display mode, press and release the “OUT/+” key once to view the outdoor maximum temperature and humidity (“MAX” will be displayed above the outdoor temperature and humidity).
b.Press and release the “OUT/+” key again to view the outdoor minimum temperature and humidity.
c.Press and release the “OUT/+” key again to return to the normal mode (timeout of viewing minimum/maximum values will occur if no keys are pressed for fifteen seconds).
d.Note: To reset the outdoor minimum and maximum temperature and humidity, first display the values you wish to reset (minimum or maximum). Next press and hold the “SET” key for at least three seconds. You will see then that the values will reset to the current temperature and humidity and corresponding time.
D.Multiple Remote Temperature Sensors
The
Note: When setting up multiple units it is important to insert batteries first into all the remote sensors, and in numeric sequence. Second install batteries into the indoor weather station. Transmission problems will arise if this is not done correctly and if the total time for
1.Set Up of Multiple Units
a.It is necessary to remove the batteries from all units currently in operation.
b.Remove the battery covers to all remote sensors.
c.Place all remote sensors in a numeric sequential order.
15