La Crosse Technology instruction manual Mounting the WS-8035 Indoor Weather Station

Page 20

2.Mounting with Adhesive Tape

a.With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure a secure hold. The mounting surface should be smooth and flat.

b.Remove the protective strip from one side of the tape.

c.Press firmly onto the designated area on the back of the mounting bracket.

d.Remove the protective strip from the other side of the tape, and situate the mounting bracket.

e.Firmly press the mounting bracket onto the mounting surface.

f.Fit the mounting post into the receptor of the mounting bracket.

B.Mounting the WS-8035 Indoor Weather Station

The indoor weather station can be mounted in two ways; free standing or hanging on a wall.

To have the indoor weather station free standing, simply unfold the stands on the back and set on a stable flat surface.

To wall mount the indoor weather station;

1.Ensure that the integrated stands are folded in.

2.Fix a screw (not included) into the desired wall, leaving approximately 3/16 of an inch (5mm) extended from the wall.

3.Place the indoor weather station onto the screw using the hanging hole on the backside.

4.Gently pull the indoor weather station down to lock the screw into place.

20

Image 20
Contents WS-8035 Wireless 433 MHz Wireless Weather Station Table of Contents Inventory of Contents Quick SET-UP Guide Do not Press ANY Buttons for 15 MinutesBattery Installation Remote Temperature and Humidity SensorDetailed SET-UP Guide Indoor Weather StationII. Start Up Sequence Initial Start Wwvb ReceptionIII. Explanation of LCD Information Program Mode Overview of programming mode sequenceLCD Contrast Setting Time Zone Setting12/24-hour Time Mode DST ON/OFF SettingRadio-controlled Time ON/OFF Setting Setting The Hour Manually Setting The Minutes ManuallySetting The Year Manually Setting The Month ManuallySetting The Date Manually Temperature Measuring Units Selection F or CRelative Pressure Setting Air Pressure Measuring Units Selection inHg/hPaForecast Sensitivity Setting Manual Setting is NOW CompletedFeatures and Operations Time Alarm Setting and OperationMoon Phase Set Up of Multiple Units Outdoor Minimum and Maximum Temperature and HumidityMultiple Remote Temperature Sensors Viewing and Operating with Multiple Remote Sensors Comfort Indicator for Indoor Temperature and HumidityWeather Forecast Icon and Pressure Trend Indicators Weather Icons Weather Tendency ArrowsAir Pressure History Bar Chart Barometric Air Pressure ReadingVII. Mounting Mounting the Remote Thermo/hygro SensorMounting the WS-8035 Indoor Weather Station Maintenance and Care Instructions Solution TroubleshootingProblem Specifications Warranty Information Support@lacrossetechnology.com