La Crosse Technology WS-8035 instruction

d.In sequential order, install batteries following the same battery installation procedures seen in Detailed Set-Up Guide section of this manual.

e.Install batteries into the indoor weather station.

f.Follow the Detailed Set-Up Guide for programming and operating instructions.

2.Viewing and Operating with Multiple Remote Sensors

a.To view the temperature of a different remote sensor press and release either of the “SNOOZE/CH” buttons. A shift from one “boxed” number to the next should be observed in the

OUTDOOR LCD.

b.The minimum and maximum temperature of the additional remote sensor can be displayed by pressing the “OUT/+” button.

c.To reset the minimum and maximum temperature readings press and hold the “SET” button for 3 seconds and that temperature/humidity record for that remote sensor will be reset only.

Each remote sensor will have its own minimum and maximum values stored.

E.Comfort Indicator for Indoor Temperature and Humidity

1.The comfort level indicator appears inbetween the indoor tempearture and humidity.

2.The indicator will display a “happy-face” when the temperature is between 68°F and 79°F (20°C and 25.9°C), and the humidity is between 45% and 64%.

3.A “sad-face” will be displayed when the temperature and humidity are outside the mentioned ranges.

F.Weather Forecast Icon and Pressure Trend Indicators

The weather forecasting feature is estimated to be 75% accurate, and is based solely upon the change of air pressure over time. The WS-8035 averages past air-pressure readings to provide an accurate forecast— creating a necessity to disregard all weather forecasting for 12-24 hours after the unit has been set-up, reset, or moved from one altitude to another (i.e. from one floor of a building to another floor). In areas where the weather is not affected by the change of air pressure, this feature will be less accurate.