IV. Function Key Layout

A.The below picture shows the six function keys used in programming and operation of your indoor weather station

V.Program Mode

The program mode is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to program the indoor weather center. Complete programming is usually done for the initial set-up, and will require you to skip step 1,2 and 3 of each programming section. The programming mode can be exited at any time by either pressing the “Snooze/CH” button, or waiting for the 15-second time-out to take effect.

A. Overview of programming mode sequence

1.	LCD Contrast	2.	Time Zone	3.	DST ON/OFF
4.	Radio-controlled	5.	12/24-hour	6.	Hour
	Time ON/OFF		time mode
7.	Minute	8.	Year	9.	Month
10.	Date	11.	°F/°C	12.	inHg/hPa
13.	Relative pressure	14.	Forecast
	setting		sensitivity

B.LCD Contrast Setting

1.Press and hold the “SET” button for five seconds.

2.“lcd” will appear at the top of the display and a number will flash next to it.

3.Press and release the “OUT/+” button to select the desired LCD contrast setting.

4.Press and release the “SET” button to confirm the LCD contrast setting and continue to the Time Zone setting

C.Time Zone Setting

1.Press and hold the “SET” button for five seconds.

2.“lcd” will appear at the top of the display and a number will flash next to it.

3.Press and release the “SET” button once more to advance to the Time Zone setting.

4.A number will flash to the left of the letter “h” at the top of the display just below the time display.