La Crosse Technology WS-8035 DST ON/OFF Setting, Radio-controlled Time ON/OFF Setting

Page 9

5.Press and release the “+” button to select the desired time zone.

6.Press and release the “SET” button to confirm the Time Zone setting and continue to the DST ON/OFF setting.

D. DST ON/OFF Setting

1.Press and hold the “SET” button for five seconds.

2.“lcd” will appear at the top of the display and a number will flash next to it.

3.Press and release the “SET” button twice more to advance to the DST ON/OFF setting.

4.“DST” will appear to the right of the Moon Phase display and “ON” or “OFF” will flash above that.

5.Press and release the “OUT/+” button to select DST ON/OFF.

Note: Some locations (Arizona and parts of Indiana) do not follow Daylight Saving Time.

6.Press and release the “SET” button to confirm the DST ON/OFF setting and continue to the Radio-controlled Time ON/OFF setting.

E.Radio-controlled Time ON/OFF Setting

1.Press and hold the “SET” button for five seconds.

2.“lcd” will appear at the top of the display and a number will flash next to it.

3.Press and release the “SET” button three more times to advance to the Radio-controlled time ON/OFF setting.

4.“RCC” will appear to the right of the Moon Phase display and “ON” or “OFF” will flash above that.

5.Press and release the “+” button to select Radio-controlled time ON/OFF setting.

6.Press and release the “SET” button to confirm the Radio- controlled time ON/OFF setting and continue to the 12/24-hour Time Mode setting.

F.12/24-hour Time Mode

1.Press and hold the “SET” button for five seconds.

2.“lcd” will appear at the top of the display and a number will flash next to it.

3.Press and release the “SET” button four more times to advance to the 12/24-hour time mode setting.

4.“12h” or “24h” will flash to the right of the Moon Phase display.

5.Press and release the “OUT/+” button to select 12 or 24-hour time mode.

Note: In 12h mode “PM” will appear to the left of the time during PM hours. If the time is not within the PM hours nothing will be displayed. Be sure to set the time to the correct AM/PM time to ensure automatic reception.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents WS-8035 Wireless 433 MHz Wireless Weather Station Table of Contents Inventory of Contents Do not Press ANY Buttons for 15 Minutes Quick SET-UP GuideRemote Temperature and Humidity Sensor Battery InstallationDetailed SET-UP Guide Indoor Weather StationWwvb Reception II. Start Up Sequence Initial StartIII. Explanation of LCD Information Overview of programming mode sequence Program ModeLCD Contrast Setting Time Zone SettingDST ON/OFF Setting Radio-controlled Time ON/OFF Setting12/24-hour Time Mode Setting The Minutes Manually Setting The Hour ManuallySetting The Year Manually Setting The Month ManuallyTemperature Measuring Units Selection F or C Setting The Date ManuallyRelative Pressure Setting Air Pressure Measuring Units Selection inHg/hPaManual Setting is NOW Completed Forecast Sensitivity SettingTime Alarm Setting and Operation Features and OperationsMoon Phase Outdoor Minimum and Maximum Temperature and Humidity Multiple Remote Temperature SensorsSet Up of Multiple Units Comfort Indicator for Indoor Temperature and Humidity Weather Forecast Icon and Pressure Trend IndicatorsViewing and Operating with Multiple Remote Sensors Weather Tendency Arrows Weather IconsBarometric Air Pressure Reading Air Pressure History Bar ChartMounting the Remote Thermo/hygro Sensor VII. MountingMounting the WS-8035 Indoor Weather Station Maintenance and Care Instructions Troubleshooting ProblemSolution Specifications Warranty Information Support@lacrossetechnology.com
Top Page Image Contents