La Crosse Technology TX4U II. the TX5U-RAINFALL Sensor, III. the WS-7095U-WEATHER Center

Page 22

II.THE TX5U—RAINFALL SENSOR

The Rainfall Sensor can be mounted in two ways:

•simply placing it in a desired location, or

•mounting it to surface with the provided screws.

Ensure that the Rainfall Sensor is completely horizontal and stable. 1. Rotate the rainfall collector separating it from the base.

2.There are two cylindrical holes in the base to guide the mounting screws. Place the base over a desired mounting surface. With a pencil, mark the mounting surface through the cylindrical holes.

3.Where marked, start the screws.

4.Place the base over mounting surface. Install screws through the cylindrical holes and into the started holes on the mounting surface.

5.Secure the screws, ensuring that no part of the base can lift off the mounting surface.

6.Remove the manufacture tape from the teeter-totter on the base. If this is not done there will be no way to measure rainfall, and no measurement will display on the Weather Center.

7.Place the rainfall collector onto the base. Place the 3 tabs (on the rainfall collector) into the tab slots (on the base) and turn counter-clockwise.

III.THE WS-7095U—WEATHER CENTER

1.Using a straightedge, horizontally space at 3 3/16 of an inch (81mm) three screw positions on a wall. From the center screw position, use the straightedge to vertically mark a fourth screw position 20 5/16 of an inch (516mm) down.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Page Table of Contents Inventory of Contents Quick SET-UP GuideRemote THERMO-HYGRO Sensor Detailed SET-UP Guide Battery InstallationRainfall Sensor Weather Center LCD ScreensFunction Buttons Program ModeII. Setting the LCD Contrast III /24 Hour Time Display SelectionTime Zone Setting IV. Time SettingVI. Date Setting IX. Weather Forecast Sensitivity Setting VII. Date Display SettingVIII. Selecting F or C and Inches or Millimeters Displaying Relative hPa/inHg or Absolute hPa/inHg XI. Manually Setting the Relative AIR Pressure XII. Selecting BAR Graph DisplayFeatures & Operations Moon Phase Waning Moon PhasesII. Minimum & Maximum Temperatures Displays and Functions III. Weather Forecast & Weather Icons Resetting the Minimum & Maximum RecordsWeather Icons Weather Tendency Arrows Comfort Level IndicatorStorm Warning IV. BAR Graph Histories AIR Pressure History Rainfall History Rainfall Quantity VI. Resetting Rainfall Information Rainfall Quantity Totals Manual Setting of the Rain MultiplicatorHard Reset of Eeprom Weather Center Memory VII. Adding More Sensors optionalSelecting Which Sensor Data to Display SET-UP of Multiple SensorsMounting Mounting with the Screws TX4U-REMOTE THERMO-HYGRO SensorMounting with Adhesive Tape II. the TX5U-RAINFALL Sensor III. the WS-7095U-WEATHER CenterHanging holes Problem Maintenance and CareTroubleshooting SolutionSpecifications Power supply Sensor reading updateDimensions L x W x H Warranty Information Support@lacrossetechnology.com
Top Page Image Contents