La Crosse Technology TX5U, WS-7095U, TX4U instruction manual Weather Center, LCD Screens

Page 5

C.WEATHER CENTER

1.Remove the battery cover. To do this, place a solid object in the space provided at the lower- central position of the battery cover (the cover has white writing on it) then push up and pull out on the battery cover.

2.Observe the correct polarity, and install three C batteries.

3.Replace the battery cover.

THE LCD SCREENS

Battery

Cover

Battery

Compartment

Immediately after the batteries have been installed, the LCD (Liquid Crystal Display) Screens will completely light up for a brief moment. There are 6 LCD Screens, each displaying different information.

Note: After the LCD Screens briefly light up, “267” will appear in the LCD 1, then the LCD’s will display the default settings. A low-battery warning-icon appears in LCD 1 beside the “TIME” icon (this should not be on). There is also a satellite icon that appears in LCD 6, under the “MAX” icon—this icon informs the user that the Weather Center is receiving signals from the sensors. Within 12 minutes the Outdoor temperature and humidity should be displayed— if not, remove batteries from all units and repeat battery installation.

Following is a general display description of each LCD. Details concerning the LCD Screens will be explained during the complete Programming sections and the Features & Operations sections.

LCD 1

LCD 2

LCD 1—shows the time.

LCD 2—moon phases and dates. LCD 3—indoor temperature/humidity. LCD 4—forecast icons and air pressure. LCD 5—rainfall/air pressure histories,

and rain quantity.

LCD 6—outdoor temperature/humidity.

,1

LCD 3

P„

LCD 4

LCD 5

LCD 6

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Page Table of Contents Quick SET-UP Guide Inventory of ContentsRainfall Sensor Detailed SET-UP Guide Battery InstallationRemote THERMO-HYGRO Sensor LCD Screens Weather CenterII. Setting the LCD Contrast Program ModeFunction Buttons III /24 Hour Time Display SelectionVI. Date Setting IV. Time SettingTime Zone Setting VIII. Selecting F or C and Inches or Millimeters VII. Date Display SettingIX. Weather Forecast Sensitivity Setting Displaying Relative hPa/inHg or Absolute hPa/inHg XII. Selecting BAR Graph Display XI. Manually Setting the Relative AIR PressureWaning Moon Phases Features & Operations Moon PhaseII. Minimum & Maximum Temperatures Displays and Functions Weather Icons Resetting the Minimum & Maximum RecordsIII. Weather Forecast & Weather Icons Storm Warning Comfort Level IndicatorWeather Tendency Arrows IV. BAR Graph Histories AIR Pressure History Rainfall History Rainfall Quantity Manual Setting of the Rain Multiplicator VI. Resetting Rainfall Information Rainfall Quantity TotalsVII. Adding More Sensors optional Hard Reset of Eeprom Weather Center MemoryMounting SET-UP of Multiple SensorsSelecting Which Sensor Data to Display Mounting with Adhesive Tape TX4U-REMOTE THERMO-HYGRO SensorMounting with the Screws III. the WS-7095U-WEATHER Center II. the TX5U-RAINFALL SensorHanging holes Troubleshooting Maintenance and CareProblem SolutionSpecifications Dimensions L x W x H Sensor reading updatePower supply Warranty Information Support@lacrossetechnology.com
Top Page Image Contents