La Crosse Technology TX5U, WS-7095U, TX4U instruction manual Hanging holes

Page 23

2.Install four mounting screws (not included) into a wall within transmission range— leaving approximately 3/16 of an inch (5mm) extended from the wall for the center screws, and 11/16 of an inch (18mm) extended from the wall for the two outer screws.

3.Place the Weather Center onto the screws, using the hanging holes on the backside. Gently pull the Weather Center down to lock the screws into place.

Hanging holes

23

Image 23

Contents Page Table of Contents Quick SET-UP Guide Inventory of ContentsRainfall Sensor Detailed SET-UP Guide Battery InstallationRemote THERMO-HYGRO Sensor LCD Screens Weather CenterIII /24 Hour Time Display Selection Program ModeII. Setting the LCD Contrast Function ButtonsVI. Date Setting IV. Time SettingTime Zone Setting VIII. Selecting F or C and Inches or Millimeters VII. Date Display SettingIX. Weather Forecast Sensitivity Setting Displaying Relative hPa/inHg or Absolute hPa/inHg XII. Selecting BAR Graph Display XI. Manually Setting the Relative AIR PressureWaning Moon Phases Features & Operations Moon PhaseII. Minimum & Maximum Temperatures Displays and Functions Weather Icons Resetting the Minimum & Maximum RecordsIII. Weather Forecast & Weather Icons Storm Warning Comfort Level IndicatorWeather Tendency Arrows IV. BAR Graph Histories AIR Pressure History Rainfall History Rainfall Quantity Manual Setting of the Rain Multiplicator VI. Resetting Rainfall Information Rainfall Quantity TotalsVII. Adding More Sensors optional Hard Reset of Eeprom Weather Center MemoryMounting SET-UP of Multiple SensorsSelecting Which Sensor Data to Display Mounting with Adhesive Tape TX4U-REMOTE THERMO-HYGRO SensorMounting with the Screws III. the WS-7095U-WEATHER Center II. the TX5U-RAINFALL SensorHanging holes Solution Maintenance and CareTroubleshooting ProblemSpecifications Dimensions L x W x H Sensor reading updatePower supply Warranty Information Support@lacrossetechnology.com