La Crosse Technology WS-2510 manual Setting the air pressure display units, Keypad beep on/off

Page 13

Setting the air pressure display units

The display units for air pressure are shown in touch screen field 11 on the right hand side next to the air pressure value. The factory setting is hPa.

-By touching field 11 the display units can be switched between hPa, mmHg or inHg.

Keypad beep on/off

-The keypad beep can be switched on (Sound on) or off (Sound off) by touching field 12.

Setting the display type for the history (trend display)

-By touching field 16 the history display can be switched between a bar and a line display.

Bar display

Line display

Setting the sunshine threshold value

The set up field enables the brightness threshold to be set, above which the light striking the brightness sensor is to be interpreted as sunshine. This threshold can be set between 1 and 99 klux and is set in the factory to 20 klux.

A value above the set value is counted as sunshine and is indicated by the little sun symbol in the “SUNSHINE DURATION” display field.

This value corresponds to the threshold value generally used in meteorology for registering the hours of sunshine.

-Touch screen field 19 (SUNSHINE DURATION) must be pressed in order to set the required threshold value.

-The associated display will now flash:

and the lower touch screen field will change to the following

-The required value can now be set using the touch screen fields “+” and “–”. It is possible to run through the display more quickly by pressing for longer.

-When the value has been set, you can exit set-up by pressing the “END” key. The value is now stored.

On its part, the brightness sensor also determines a sunshine duration referred to a fixed threshold of 20 klux. If a threshold of 20 klux is set at the base station, it takes the value transmitted by the sensor for its further calculations. The advantage of this is that breaks in reception have no effect on the measured value.

Setting the time function

The time of day, AM/PM indication (for 12h display) and the activated WWVB receiving function (radio mast symbol) are displayed in touch screen field 20.

-Touch screen field 20 must be pressed in order to make the required settings.

-The time of day display will now flash:

German (24 h):

or English (12 h)

and the lower touch screen field will change to the following form:

-The required time can now be set using the touch screen fields “+” and “–”. It is possible to run through the display more quickly by pressing for longer.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Touch Screen Wireless Weather Station WS-2510 25-26 Contents27-28 General information and functioning Display of the indoor temperature in F or C and humidityDisplay of wind speed with wind direction and variation Display of the amount of rainfall in mm, l/m2 or inchesQuick overview of the display fields on the main display OtherOperation using the power adaptor Battery operationPC connection optional Bus connectionCommissioning Setting up/Wall mountingPlease note Previous weather sensors with software Version Outdoor sensorsInsertion of magnets into the outdoor sensors Description, Installation and Commissioning of sensors1 WS-2510-15 wind sensor 2 WS-2510-16 rain sensor6 WS-2510-27 temperature/humidity sensor 5 WS-2510-22 temperature/humidity sensor7 WS-2510-25 temperature/humidity outdoor sensor Brightness sensor WS-2510-19Operation Basic settings, ConfigurationCleaning mode General settings Illumination settingsConfiguration Wwvb and sensor receptionSetting the temperature display units Illumination time for battery operationIllumination time for AC adaptor operation Setting the rainfall display units Calibration of the rainfall reading indicatorAir pressure display correction Setting the display type for the history trend display Setting the air pressure display unitsSetting the time function Keypad beep on/offSensor administration Setting the day and the datePlease note Protocol versionKey functions Allocation of touch screen fields, see Normal display functionWind measurement field Outdoor sensors fields 3 toAir pressure measurement fields 10/11 Rainfall measurement fields 8/9Weather forecast Hours of sunshine Following particular features should be notedBrightness No key functionsKey functions Time/DateMinimum/Maximum value display Example for the display of maximum valuesHistory display for min/max values Deleting min/max valuesAlarm values can be set for Programming mode entering alarm valuesProgramming the min/max alarm values Setting the wake-up times Please note Setting/Resetting the MIN/MAX alarm valuesDisplay example Alarm initiation, Alarm resetChanging batteries Base station Information on fault removalSensor batteries are discharged Range Maintenance and servicing informationRepeater for range increase Perceived temperature -see Wind chill Technical dataExplanation of terms Wind strength table Beaufort Wind speed Description Warranty Information

WS-2510 specifications

The La Crosse Technology WS-2510 is a versatile weather station designed for those who want to keep an eye on environmental conditions from the comfort of their own homes. With its sleek design and user-friendly interface, the WS-2510 provides a wealth of data about local weather conditions at a glance.

One of the primary features of the WS-2510 is its accurate and reliable weather monitoring capabilities. The station measures indoor and outdoor temperatures, humidity levels, wind speed, and rainfall. This comprehensive monitoring system allows users to gain valuable insights into current weather patterns, making it easier to plan outdoor activities or simply understand changing climatic conditions.

Equipped with wireless technology, the WS-2510 transmits data from the outdoor sensor to the indoor display unit without the need for messy cables, allowing for easy installation and positioning of the sensor. This feature enhances the convenience of real-time monitoring, as users can place the outdoor unit in the optimal location for accurate readings.

The WS-2510 is also notable for its multifunctional display. The indoor console features a large, easy-to-read LCD screen that showcases critical weather information in a clear format. Moreover, it includes trend indicators that display historical data, helping users track changes over time. The display updates frequently, ensuring that the information presented is current and useful.

In terms of technology, the WS-2510 utilizes advanced sensors for temperature, humidity, and wind measurements, ensuring high accuracy. It also uses a robust wireless communication protocol that provides a reliable connection between the outdoor and indoor units.

Another attractive feature of the WS-2510 is its ability to store data over time. Users can review past weather conditions, which is especially beneficial for those interested in tracking patterns, such as seasonal changes or anomalies. The data storage function allows for a more nuanced understanding of local climate trends.

For enthusiasts and professionals alike, the La Crosse Technology WS-2510 provides a cost-effective, reliable solution for weather monitoring. Its blend of advanced technology, user-friendly features, and sleek design makes it an appealing choice for anyone looking to bring the power of meteorological data into their home. With the WS-2510, monitoring local weather has never been easier or more engaging.
Top Page Image Contents