La Crosse Technology WS-2510 manual Alarm initiation, Alarm reset, Display example

Page 24

3.4.4.Alarm initiation, Alarm reset

-If the measured value exceeds or falls below one of the set alarm values, the display will go off and the alarm value in question together with the text “ALARM” and the appropriate high or low deviation (MAX or MIN) will be displayed. At the same time, an intermittent alarm tone will sound.

-In addition, the point in time at which the alarm occurred will be shown in the time of day field so that it is also possible to establish this time later.

-The alarm is reset using the “RESET” key.

Display example 1:

Alarm from outdoor sensor 3 on falling below -12 °C, time of alarm Monday, 10.8. at 10:53 AM.

Display example 2:
Wake-up on Thursday, 24.11., 6:30 AM	- Wake-up occurs every Thursday.

Image 24

Contents Touch Screen Wireless Weather Station WS-2510 Contents 25-2627-28 Display of the indoor temperature in F or C and humidity General information and functioningDisplay of wind speed with wind direction and variation Display of the amount of rainfall in mm, l/m2 or inchesOther Quick overview of the display fields on the main displayBattery operation Operation using the power adaptorPC connection optional Bus connectionSetting up/Wall mounting CommissioningPlease note Previous weather sensors with software Version Outdoor sensorsDescription, Installation and Commissioning of sensors Insertion of magnets into the outdoor sensors1 WS-2510-15 wind sensor 2 WS-2510-16 rain sensor5 WS-2510-22 temperature/humidity sensor 6 WS-2510-27 temperature/humidity sensor7 WS-2510-25 temperature/humidity outdoor sensor Brightness sensor WS-2510-19Basic settings, Configuration OperationGeneral settings Illumination settings Cleaning modeConfiguration Wwvb and sensor receptionIllumination time for battery operation Setting the temperature display unitsIllumination time for AC adaptor operation Calibration of the rainfall reading indicator Setting the rainfall display unitsAir pressure display correction Setting the air pressure display units Setting the display type for the history trend displaySetting the time function Keypad beep on/offSetting the day and the date Sensor administrationPlease note Protocol versionNormal display function Key functions Allocation of touch screen fields, seeOutdoor sensors fields 3 to Wind measurement fieldRainfall measurement fields 8/9 Air pressure measurement fields 10/11Weather forecast Following particular features should be noted Hours of sunshineBrightness No key functionsTime/Date Key functionsMinimum/Maximum value display Example for the display of maximum values Deleting min/max values History display for min/max valuesProgramming mode entering alarm values Alarm values can be set forProgramming the min/max alarm values Setting/Resetting the MIN/MAX alarm values Setting the wake-up times Please noteAlarm initiation, Alarm reset Display exampleInformation on fault removal Changing batteries Base stationSensor batteries are discharged Maintenance and servicing information RangeRepeater for range increase Technical data Perceived temperature -see Wind chillExplanation of terms Wind strength table Beaufort Wind speed Description Warranty Information