La Crosse Technology WS-2510 Please note, Setting the day and the date, Sensor administration

Page 14

The seconds are automatically set to zero.

-The WWVB reception can also be switched on or off by means of the “WWVB” touch screen field as long as the time is flashing (radio mast symbol on or off respectively).

-In addition, it now possible to select the display format for the time, date and day of the week between military and standard format using the “12/24h” touch screen field.

-When all the settings have been made, you can exit set-up by pressing the “END” key. The clock will now be started (seconds start automatically from zero).

Please note:

Reception of the WWVB time transmission signal is possible within a radius of approx. 2000 miles of Ft. Collins, Co. Outside this range, the clock is set manually and runs as an equally precise quartz clock.

Setting the day and the date

The date and the day of the week are displayed in touch screen field 21.

-Touch screen field 21 must be pressed in order to make the required settings.

-The date display will now flash:

German (24 h):

or English (12 h).

and the lower touch screen field will change to the following form:

-The date can now be set using the touch screen fields “+” and “–”. It is possible to run through the display more quickly by pressing for longer.

-The day of the week can also be selected using touch screen field 27 (DAY) as long as the date is flashing.

-In addition, it now possible to select the display format for the time, date and day of the week between military and standard format using the “12/24h” touch screen field.

Please note: The whole of the display changes each time, i.e. the time, date format and language for the day of the week display.

-When all the settings have been made, you can exit set-up by pressing the “END” key.

Sensor administration

Sensor administration is called up by pressing the “SENSOR ADMIN” touch screen field:

4

1 2

3

Here you can set the following parameters:

-Address for the rain (1), wind (2) and brightness sensors (3) if deviating from address 7. If an address is changed here, after leaving the configuration mode, the weather station will carry out a complete sensor synchronization for 6 minutes (as at 7:30 in the morning).

-Sensor protocol version (4).

1.Sensor addresses

The sensor addresses can be set up by touching the associated field (0 to 7).

2.Protocol version

The sensor protocol version can be changed over between 1.1 and 1.2 by touching the “Version” field (field 1)(for an explanation see section on Commissioning, page 6).

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Touch Screen Wireless Weather Station WS-2510 27-28 Contents25-26 Display of wind speed with wind direction and variation Display of the indoor temperature in F or C and humidityGeneral information and functioning Display of the amount of rainfall in mm, l/m2 or inchesOther Quick overview of the display fields on the main displayPC connection optional Battery operationOperation using the power adaptor Bus connectionPlease note Previous weather sensors with software Version Setting up/Wall mountingCommissioning Outdoor sensors1 WS-2510-15 wind sensor Description, Installation and Commissioning of sensorsInsertion of magnets into the outdoor sensors 2 WS-2510-16 rain sensor7 WS-2510-25 temperature/humidity outdoor sensor 5 WS-2510-22 temperature/humidity sensor6 WS-2510-27 temperature/humidity sensor Brightness sensor WS-2510-19Basic settings, Configuration OperationConfiguration General settings Illumination settingsCleaning mode Wwvb and sensor receptionIllumination time for AC adaptor operation Illumination time for battery operationSetting the temperature display units Air pressure display correction Calibration of the rainfall reading indicatorSetting the rainfall display units Setting the time function Setting the air pressure display unitsSetting the display type for the history trend display Keypad beep on/offPlease note Setting the day and the dateSensor administration Protocol versionNormal display function Key functions Allocation of touch screen fields, seeOutdoor sensors fields 3 to Wind measurement fieldRainfall measurement fields 8/9 Air pressure measurement fields 10/11Weather forecast Brightness Following particular features should be notedHours of sunshine No key functionsMinimum/Maximum value display Time/DateKey functions Example for the display of maximum valuesDeleting min/max values History display for min/max valuesProgramming the min/max alarm values Programming mode entering alarm valuesAlarm values can be set for Setting/Resetting the MIN/MAX alarm values Setting the wake-up times Please noteAlarm initiation, Alarm reset Display exampleSensor batteries are discharged Information on fault removalChanging batteries Base station Repeater for range increase Maintenance and servicing informationRange Explanation of terms Technical dataPerceived temperature -see Wind chill Wind strength table Beaufort Wind speed Description Warranty Information

WS-2510 specifications

The La Crosse Technology WS-2510 is a versatile weather station designed for those who want to keep an eye on environmental conditions from the comfort of their own homes. With its sleek design and user-friendly interface, the WS-2510 provides a wealth of data about local weather conditions at a glance.

One of the primary features of the WS-2510 is its accurate and reliable weather monitoring capabilities. The station measures indoor and outdoor temperatures, humidity levels, wind speed, and rainfall. This comprehensive monitoring system allows users to gain valuable insights into current weather patterns, making it easier to plan outdoor activities or simply understand changing climatic conditions.

Equipped with wireless technology, the WS-2510 transmits data from the outdoor sensor to the indoor display unit without the need for messy cables, allowing for easy installation and positioning of the sensor. This feature enhances the convenience of real-time monitoring, as users can place the outdoor unit in the optimal location for accurate readings.

The WS-2510 is also notable for its multifunctional display. The indoor console features a large, easy-to-read LCD screen that showcases critical weather information in a clear format. Moreover, it includes trend indicators that display historical data, helping users track changes over time. The display updates frequently, ensuring that the information presented is current and useful.

In terms of technology, the WS-2510 utilizes advanced sensors for temperature, humidity, and wind measurements, ensuring high accuracy. It also uses a robust wireless communication protocol that provides a reliable connection between the outdoor and indoor units.

Another attractive feature of the WS-2510 is its ability to store data over time. Users can review past weather conditions, which is especially beneficial for those interested in tracking patterns, such as seasonal changes or anomalies. The data storage function allows for a more nuanced understanding of local climate trends.

For enthusiasts and professionals alike, the La Crosse Technology WS-2510 provides a cost-effective, reliable solution for weather monitoring. Its blend of advanced technology, user-friendly features, and sleek design makes it an appealing choice for anyone looking to bring the power of meteorological data into their home. With the WS-2510, monitoring local weather has never been easier or more engaging.
Top Page Image Contents