Fluke PN 2063508 Turning Beeper OFF, Maintenance, Replacing the Battery, Replacing the Test Leads

Page 26

12 Multimeter

TURNING BEEPER OFF

TURNING BEEPER OFF

To disable all beeper functions, press and hold down [Z] for 2 seconds while turning the meter on.

MAINTENANCE

WWarning

To avoid electrical shock or damage to the meter, do not get water inside the case. Remove the test leads and any input signals before opening the case.

Periodically wipe the case with a damp cloth and detergent. Do not use abrasives or solvents.

NReplacing the Battery

The meter uses a 9 V battery (NEDA 1604 or IEC 6F22). To replace the battery, remove the four screws from the back of the meter and lift off the front. Remove the battery from case bottom.

Replacing the Test Leads

The meter uses double-insulated test leads. When replacing the test leads, order Fluke PN 855742 only.

23

Image 26

Contents Multimeter Table of Contents Multimeter Read First Safety Information Symbols Display DisplayOperating Features Operating FeaturesStandby Mode Input RangesAutoranging Manually Selecting a RangeMeasuring Voltage Measuring Voltage Testing Continuity and Measuring Resistance Continuity and Resistance Measurements Testing Diodes Testing Diodes Vchek and HOW to USE IT Disabling iWITH Function Lock Measuring Capacitance Measuring Capacitance Using MIN MAX Functions Recording Minimum and Maximum ReadingsDisplaying Minimum and Maximum Reading Recording Minimum and Maximum Reading with Elapsed Time Maximum and Minimum Reading with Elapsed Time Capturing Continuity Intermittents with Continuity Capture Open-to-Short and Short-to-Open Transitions Turning Beeper OFF MaintenanceReplacing the Battery Replacing the Test LeadsService and Parts Accessories SpecificationsTerminal and Earth Ground Multimeter Us rs Manual Continuity Capture