Fluke PN 2063508 user manual Autoranging, Manually Selecting a Range

Page 9

12Multimeter Users Manual

Autoranging

The meter defaults to autorange when you turn it on. In autorange, the meter selects the range automatically.

Manually Selecting a Range

The meter also has a manual range mode. In manual range, you select and lock the meter in a range. To manually select a range:

1.Press [V]. The meter is locked in the range it is in, and V is displayed. In manual range, i is disabled.

2.Press [V] to step through the ranges. NOTE: The 4000 mV range, which can only be entered in manual range, is convenient when using accessories.

3.To return to autorange, press [V] for 2 seconds (until V is no longer displayed), or change the measurement function.

6

Image 9

Contents Multimeter Table of Contents Multimeter Read First Safety Information Symbols Display DisplayOperating Features Operating FeaturesInput Ranges Standby ModeManually Selecting a Range AutorangingMeasuring Voltage Measuring Voltage Testing Continuity and Measuring Resistance Continuity and Resistance Measurements Testing Diodes Testing Diodes Vchek and HOW to USE IT Disabling iWITH Function Lock Measuring Capacitance Measuring Capacitance Recording Minimum and Maximum Readings Using MIN MAX FunctionsDisplaying Minimum and Maximum Reading Recording Minimum and Maximum Reading with Elapsed Time Maximum and Minimum Reading with Elapsed Time Capturing Continuity Intermittents with Continuity Capture Open-to-Short and Short-to-Open Transitions Replacing the Battery MaintenanceTurning Beeper OFF Replacing the Test LeadsSpecifications Service and Parts AccessoriesTerminal and Earth Ground Multimeter Us rs Manual Continuity Capture