Fluke PN 2063508 user manual Standby Mode, Input Ranges

Page 8

12 Multimeter

STANDBY MODE

STANDBY MODE

In standby mode, the display goes blank to preserve battery life. The meter beeps and enters Standby if it is ON but inactive for more than 45 minutes. Press any pushbutton to resume operation. Standby is not allowed if the meter is in the MIN MAX mode.

INPUT RANGES

The input range determines the highest value the meter will measure. Most functions have more than one range (see SPECIFICATIONS). If the range is too low, the display shows OL (overload). If the range is too high, the display will show fewer digits of resolution.

5

Image 8

Contents Multimeter Table of Contents Multimeter Read First Safety Information Symbols Display DisplayOperating Features Operating FeaturesStandby Mode Input RangesAutoranging Manually Selecting a RangeMeasuring Voltage Measuring Voltage Testing Continuity and Measuring Resistance Continuity and Resistance Measurements Testing Diodes Testing Diodes Vchek and HOW to USE IT Disabling iWITH Function Lock Measuring Capacitance Measuring Capacitance Using MIN MAX Functions Recording Minimum and Maximum ReadingsDisplaying Minimum and Maximum Reading Recording Minimum and Maximum Reading with Elapsed Time Maximum and Minimum Reading with Elapsed Time Capturing Continuity Intermittents with Continuity Capture Open-to-Short and Short-to-Open Transitions Maintenance Replacing the BatteryTurning Beeper OFF Replacing the Test LeadsService and Parts Accessories SpecificationsTerminal and Earth Ground Multimeter Us rs Manual Continuity Capture