Settings

Using the Mobile APP

Each Sensor-based weather page has a “SETTINGS” tab that allows you to view additional information about the sensor. One of the options shown on the settings tab is “SENSOR NAME”. This allows you to customize your APP to organize where sensors are physically located within their environment, this can be especially helpful if you have multiple sensors. For example, you may have a sensor located in the yard and another one located near a deck- so you may name one “YARD” and the other “DECK”.

Alarms

Each Sensor-based weather page has an “ALARM” tab that allows you to set custom alarms. Alarm messages are

sent to a specified e-mail address or a text message is sent* to a specified mobile phone number.

Click the “ALARM” button to set alarm preferences and to turn the alarm on or off

Touch the “Settings” tab

to view and/or edit specific

sensor settings.

Touch the “Current” tab to return to the current readings view.

Tap to edit the sensor label name

Choose “ENGLISH” (ºF) or “METRIC” (ºC) display units

Allow this sensor to be visible to other users that you are sharing your bridge with

Press “REMOVE” if you no longer want to view or track this sensorsʼ data. CAUTION: REMOVING this sensor will erase itʼs history information as well.

Tap “SAVE” to save alarm settings when you are finished

Tap to adjust the HIGH alarm trigger value (if applicable)

Tap to adjust the LOW alarm trigger value (if applicable)

Tap to enter/edit an E-MAIL address that you want alert e-mail messages sent to.

Tap to enter/edit a mobile phone number that you want alert TEXT* messages sent to.

* Standard text messaging and data rates apply, check with your phone service provider for pricing.