Acu-Rite 9150 Wait for the bridge to start up, Prepare the Bridge for Registration

Connect

Step 3. Wait for the bridge to start up

After connecting the power and Ethernet cable, the Acu-Link Internet Bridge may need up to 30 MINUTES to start up and automatically download the latest software before it can register with the server.

WAIT	READY
STATUS	STATUS
LIGHT 2	LIGHT 2
STEADY	BLINKING

STATUS	MAY TAKE	STATUS	BOTH LIGHTS
LIGHT 1		LIGHT 1
	UP TO		ALTERNATING
BLINKING		BLINKING
	30 MINUTES		BLINKING

After plugging in the AC adapter the bridge will automatically perform the following boot operations:

	Startup Sequence	duration	STATUS LIGHT 1	STATUS LIGHT 2
1	Initial Boot	30	STEADY	STEADY
		seconds
2	Downloading	5 to 30	BLINKING	STEADY
	firmware from
		minutes	RAPIDLY
	Acu-Link server
3	Re-Booting	30	STEADY	STEADY
		seconds
4	Ready for Use	READY	BLINKING	BLINKING
			RAPIDLY	RAPIDLY
		6

Step 4. Prepare the Bridge for Registration

The Acu-link Internet Bridge will transmit your weather information to the secure AcuRite servers. From there you will be able to view and track this information via the web site or by downloading and using the Acu-Link APP for iPhone and Android smart phones, we will cover that later.

Before you can access all this wonderful information, you must first “make the connection” by registering your bridge.

1.Make sure that BOTH status lights are blinking rapidly.

2.Press AND HOLD the “REGISTER” button on the bottom of the Acu-Link Internet Bridge for 4 SECONDS.

BLINKING

BLINKING

Acu-Link Tip

Press the “REGISTER” button only once during initial installation. DO NOT PRESS THE REGISTER BUTTON AGAIN AFTER YOUR BRIDGE HAS BEEN SUCCESSFULLY REGISTERED, or you will lose previously stored weather data and have to register again!

7