Acu-Rite 9150 instruction manual Connect the Ethernet cable Connect the AC power adaptor

Page 4

Connect

Step 1. Connect the Ethernet cable

Step 2. Connect the AC power adaptor

Connect the Ethernet cable to the Ethernet port on the Acu-Link Internet Bridge

flip-up the

RF Antennae

for best

reception

Connect the other end of the Ethernet cable to an open Ethernet port on your network router*

Acu-Link Tip

Acu-Link will work with standard routers, wireless routers, and Ethernet hubs the same, as long as there is an available Ethernet port and an active “always on” internet connection available.

4

YOUR PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE

PRODUCT REGISTRATION

To receive product updates,

warranty service,

and information, Go to

www.AcuRite.com	Register a Product

5

Image 4

Contents Internet Bridge Introduction Whatʼs in the box? includedWhat do I need? not included How does it work?Choosing a location Getting to Know the Acu-Link Internet BridgeAdd Additional Sensors Connect the Ethernet cable Connect the AC power adaptor Wait for the bridge to start up Prepare the Bridge for RegistrationRegister your Acu-Link Bridge Online My Web Bridges Device IDMy Sources My Dashboard Adding Sources and Managing SensorsWidgets Deleting Sources and Managing Sensors Getting to Know the WidgetsSensor Settings Showing & Hiding WidgetsSensor Name Sharing Sensor Data OnlineCharting History AlarmsWeather Select Widgets Sharing An Overview Follow a Friendʼs BridgeShare My Bridge Acu-Link Configuration Acu-Link APP RecordsSettings Tap Save to save alarm settings when you are finishedDashboard Forecast ForecastProblem No Power to Bridge Possible Solutions Problem Bridge is not Seeing any SensorsProblem What do those Bridge Lights Mean? BlinkingHaving Problems? Weʼre Here to Help Go to the web site Talk to a real personProduct Facts