Acu-Rite 9150 instruction manual Getting to Know the Acu-Link Internet Bridge, Choosing a location

Getting to Know the Acu-Link Internet Bridge

			Weather Sensor RF
	Connections		Reception antennae
			STATUS LIGHT 2
			RF Reception
Power		Ethernet
Port		Port

STATUS LIGHT 1

Network Uplink

(bottom)

Register Button

DEVICE I.D.

(MAC Address)

A unique ID that is needed to register your bridge online.

Acu-Link Tip

You will need the MAC address number that is printed on the bottom of the bridge when it comes time to register your bridge online, so write it down and keep it handy!

2

Connect

Choosing a location

The Acu-Link Internet Bridge receives data from sensors via 433mhz wireless radio frequency. Reception range of the signal from sensors can be limited by very thick concrete or metallic walls or materials. Other “noisy” electronic devices such as TVʼs and microwaves may also interfere with the signal reception.

To help ensure a successful reception from the AcuRite sensors, choose a suitable location no more than 330 feet from the sensor to place the Bridge. Choose a location free of large stone or concrete surfaces, metallic surfaces, and place at least 3 feet away from other electronic devices.

Acu-Link	330 feet Maximum
Internet		sensor(s)
Bridge	(100 meters)

Add Additional Sensors
	C O M P A T I B L E

Look for this logo on products that have sensors that are compatible with your Acu-Link Internet Bridge. Visit the web site for the most up to date complete listing of Acu-Link compatible sensors.

3