Cub Cadet LT1045, LT1050 manual Engaging the Parking Brake, Driving The Tractor, Driving On Slopes

Page 14

Engaging the Parking Brake

To engage the parking brake:

•Fully depress the brake pedal and hold it there while gently pushing the parking brake lever downward.

•Hold the parking brake lever down while removing your foot from the brake pedal.

•Once engaged, the parking brake lever and the brake pedal will lock in the “down” position.

To disengage the parking brake:

•Slightly depress the brake pedal.

NOTE: The parking brake must be engaged if the operator leaves the seat with the engine running or the engine will automatically shut off.

Driving The Tractor

WARNING: Avoid sudden starts, ex- cessive speed and sudden stops.

WARNING: Do not leave the seat of the tractor without first placing the PTO/Blade Engage knob in the disengaged (OFF) position, depressing the brake pedal and engaging the parking brake. If leaving the tractor unattended, also turn the ignition key off and remove the key.

•Briefly depress the brake pedal to release the parking brake. Move the throttle lever into the FAST (rabbit) position.

•To travel FORWARD, slowly depress the upper portion of the drive pedal forward until the desired speed is achieved. See Figure 6.

Brake Pedal

Drive Pedal

Figure 6

•To travel in REVERSE, check that the area behind is clear then slowly depress the lower portion of the drive pedal with the ball of your foot (NOT your heel) until the desired speed is achieved. See Figure 6.

IMPORTANT: Do NOT attempt to change the direction of travel when the tractor is in motion. Always bring the tractor to a complete stop before pivoting the drive pedal from forward to reverse or vice versa.

Driving On Slopes

Refer to the SLOPE GAUGE on page 7 to help determine slopes where you may operate the tractor safely.

WARNING: Do not mow on inclines with a slope in excess of 15 degrees (a rise of approximately 2-1/2 feet every 10 feet). The tractor could overturn and cause serious injury.

•Mow up and down slopes, NEVER across.

•Exercise extreme caution when changing direction on slopes.

•Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

•Avoid turns when driving on a slope. If a turn must be made, turn down the slope. Turning up a slope greatly increases the chance of a roll over.

•Avoid stopping when driving up a slope. If it is necessary to stop while driving up a slope, start up smoothly and carefully to reduce the possibility of flipping the tractor over backward.

Setting The Cruise Control

NOTE: The cruise control feature should only be utilized while traveling in the forward direction.

•Slowly depress the upper portion of the drive pedal until the desired speed is achieved.

•Lightly depress the cruise control lever.

•While continuing to hold the cruise lever down, lift your foot from the drive pedal (you should feel the cruise latch engage).

•Once engaged, the cruise control lever and the drive pedal will lock in the “down” position, and the tractor will maintain the same forward speed.

NOTE: Cruise control can not be set at the tractor’s fastest ground speed. If the operator should attempt to do so, the tractor will automatically decelerate to the fastest optimal mowing ground speed.

Disengage the cruise control using one of the following methods:

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operator’s Manual Table of Contents Important Safe Operation Practices General OperationChildren Slope OperationDo not Service TowingPage Slope Gauge —Gas and Oil Fill-up Shipping Brace RemovalKnow Your Lawn Tractor Choke Control Ignition Switch ModuleSeat Adjustment Lever Brake Pedal234.5 System Indicator LightsHour Meter Deck Lift LeverTo use the Reverse Caution Mode Safety Interlock SwitchesReverse Caution Mode Operating Your Lawn TractorStopping the Engine Setting the Gauge WheelsStarting the Engine Driving The Tractor Setting The Cruise ControlEngaging the Parking Brake Driving On SlopesMoving The Tractor Manually Using the Deck Lift LeverOperating the Headlights Engaging the PTO50-inch Decks MulchingInch Decks Front To Rear Making AdjustmentsLeveling the Deck Side to SideSeat Adjustment Parking Brake AdjustmentSteering Adjustment Engine Oil Maintaining Your Lawn TractorEngine Checking the Oil LevelChanging the Oil Filter Changing the Engine OIlDraining the Oil Air Filter PrecleanerService Paper Element Re-filling the Crankcase with OilFuel Filter Cleaning the Engine And DeckSpark Plugs Smart JetLubrication CarburetorAdjustment Fuse ServiceTires Cutting BladesChanging The Transmission Drive Belt BatteryCutting Deck Removal Jump StartingHydrostatic Transmission Changing the Deck BeltAll Models LT1042 Maintenance Chart Troubleshooting Trouble Possible Causes Corrective ActionAttachments Attachments & AccessoriesReplacement Parts LT1042 LT1045 LT1046 LT1050 Specifications MANUFACTURER’S Warranty Coverage CUB Cadet LLC MANUFACTURER’S ONE Year Limited Warranty Commercial USECUB Cadet LLC MANUFACTURER’S Limited Warranty Residential USE

LT1046, LT1050, LT1045 specifications

Cub Cadet is renowned for producing high-quality lawn tractors that cater to both residential and commercial needs. Among their popular models is the Cub Cadet LT series, particularly the LT1045, LT1050, and LT1046, which are designed for optimum performance and user comfort.

The Cub Cadet LT1045 is powered by a robust 19 horsepower Kohler engine, providing ample power for various lawn care tasks. Its hydrostatic transmission offers smooth and effortless maneuverability, allowing users to easily navigate their lawns without the need for gear shifting. Equipped with a 42-inch cutting deck, the LT1045 is ideal for medium-sized yards. Its adjustable cutting height ranges from 1 to 4 inches, giving users flexibility to achieve their desired grass length. Moreover, the LT1045 features a comfortable, ergonomic seat that minimizes fatigue during prolonged use.

Moving up the lineup, the LT1046 comes with a slightly more powerful 21 horsepower engine, suited for larger lawn areas. It also features a 46-inch cutting deck which enhances efficiency by covering more ground in a single pass. The LT1046 has a dual-blade system, improving grass cutting and reducing clumping, which can be beneficial for maintaining a neat appearance. Similar to the LT1045, this model incorporates the same hydrostatic transmission, making it user-friendly.

The Cub Cadet LT1050 is a step above the previous models, with an impressive 23 horsepower engine. This powerful engine is capable of handling tougher terrains and taller grass, making it a perfect choice for larger plots or uneven ground. The LT1050 features a 50-inch cutting deck, which significantly reduces mowing time. Furthermore, it boasts advanced cutting technologies such as SmartJet deck wash and a reinforced cutting deck, ensuring durability and ease of maintenance.

All these models exemplify Cub Cadet's emphasis on comfort and convenience; they are equipped with a high-back seat and easy-to-use controls, catering to users of all experience levels. Some models also include features like LED headlights for early morning or late evening mowing.

In summary, the Cub Cadet LT1045, LT1046, and LT1050 offer a variety of features designed for efficiency, comfort, and durability. With advanced engineering and practical technologies, these models are excellent choices for anyone looking to maintain their lawn with ease and precision.
Top Page Image Contents