Tascam DA-302 Phones OUT switch, Phones control, Phones jack, REW key, FWD key, Stop key

Section 4 : Features and Controls

tPHONES OUT switch

1 (2):

Outputs Deck 1 (Deck 2) playback signals from the PHONES jack.

áOutputs input signals when performing record- ing/record-pause/sampling monitor.

MIX:

Outputs mixed playback signals from both Deck 1 and Deck 2.

yPHONES control

Adjusts PHONES jack signal output level.

uPHONES jack

Connect stereo headphones.

iREW key

To rewind the tape.

áWhen pressed during playback, 2 times or 4 times normal speed reverse cueing takes place. (œp.18)

oF FWD key

To fast forward the tape.

áWhen pressed during playback, 3 times or 6 times normal speed forward cueing takes place. (œp.18)

pSTOP key

To stop the tape running.

aPLAY key

To play back the tape. (LED lights.)

sPAUSE key

Temporarily stops the tape during recording or play- back. (LED lights.) To resume recording or playback, press the PLAY key.

áEngages the Play-Pause mode when pressed in the Stop mode.

áEngages the Record-Pause mode when pressed together with the RECORD key.

áTo protect the heads, the Play-Pause mode is auto- matically released after about 8 minutes and the Stop mode is engaged.

áTo protect the heads, the Record-Pause mode is automatically released after about 8 minutes and the Sampling Monitor mode is engaged.

dRECORD key

ÉPress together with the PLAY key to start recording. (LED lights.)

ÉEngages the Sampling Monitor mode when pressed in the Stop mode. (LED lights.)

To release the Sampling Monitor mode, press the STOP key.

áSampling Monitor mode:

As in the Record-Pause mode, the Sampling Monitor mode allows you to monitor input signals. The difference is that the head drum does not rotate in the Sampling Monitor mode and there is no con- tact between head and tape.

fREC MUTE key

Use to mute recording. (œp.24)

gMenu-related key

Use to show the menu or to change the menu settings. (œp.28)

hEXECUTE key

Press to write/erase ID of each type.

jDUBBING key

Press to execute dubbing.

When the dubbing mode is selected with the DUB MODE key, the LED blinks. Pressing this key in this status starts dubbing operation and the LED lights.

kID MODE key

Use for writing/erasing ID of each type. (œp.20)

lDUB MODE key

Use to select the Dubbing mode. The selected mode is shown in the display. (œp.16)

;AUTO ID key

Use to automatically write the Start ID. (œp.20)

12