Tascam DA-302 owner manual Specifications, Tape Speed

Section 11 : Specifications

Format :	Rotary head digital audio tape deck
Tape Speed :	8.15 mm/sec. (SP: Recording/play-
	back)
	12.225 mm/sec. (only for playback)
	16.3 mm/sec. (SP: Double speed
	dubbing, LP: 4 times normal speed
	dubbing)
	4.075 mm/sec. (LP: Recording/play-
	back)
Recording Time :	120 minutes (SP: With a 120-minute
	tape)
	240 minutes (LP: With a 120-minute
	tape)

Fast Winding/Rewinding Time :

Approx. 60 seconds (with a 120- minute tape)

Channels :Stereo 2 channels

Quantization :16-bit linear (SP), 12-bit non-linear (LP)

Error Correction Method : Doubled Reed Solomon code

Sampling Rates : 48 kHz (recording/playback)

44.1kHz (recording/playback) 32 kHz (recording/playback)

Emphasis :	50	µsec./15 µsec (automatically
	applied in the Play mode)
Frequency Response :	20	–	20 kHz ± 0.5 dB (48 kHz/44.1
	kHz)
	20	–	14.5 kHz ± 0.8 dB (32 kHz)
S/N :	More than 89 dB
Dynamic Range :	More than 89 dB
Total Harmonic Distortion :

Less than 0.007% (SP), less than 0.07% (LP)

(1 kHz for recording and playback, full-scale)

Channel Separation : More than 85 dB (1 kHz)

Wow and Flutter : Unmeasurable (less than ±0.001%)

Analog Input/Output Connectors

IN :	RCA pin x 2
Normal Input Level :	–10 dBV (0.3 V), unbalanced
	(FS – 16 dB)
Input Impedance :	20 kohms
OUT :	RCA pin x 4
Normal Output Level :	–10 dBV (0.3 V), unbalanced
	(FS – 16 dB)
Maximum Output Level : +6 dBV (2.0 V), unbalanced
	(10-kohm load)
Output impedance :	Less than 1 kohm
CASCADE OUTPUT :	RCA pin x 2
Normal Output Level :	–10 dBV (0.3 V), unbalanced
	(FS – 16 dB)
Maximum Output Level : +6 dBV (2.0 V), unbalanced
	(10-kohm load)
Output impedance :	Less than 1 kohm
PHONES:	6.3 mm dia. phone jack x 1

Maximum Output Level : 50 mW + 50 mW (32-ohm load)

Digital Input /Output Connectors

INPUTS :	RCA pin x 2
Format :	IEC958 TYPE I (AES/EBU), IEC958
	TYPE II (SPDIF), automatic selection
Input Impedance :	75 ohms
OUTPUTS: RCA pin x 2
Format :	IEC958 TYPE I (AES/EBU), IEC958
	TYPE II (SPDIF), selected with menu
Output Level :	More than 0.5 Vp-p
Output Impedance :	75 ohms
CASCADE OUTPUT :	RCA pin x 1
Format :	Conforming to DIGITAL OUTPUTS
Output Level :	More than 0.5 Vp-p
Output Impedance :	75 ohms
Control Input/Output Connectors
INPUT :	3.5 mm dia. mini-jack
Input Level :	TTL level
OUTPUT :	3.5 mm dia. mini-jack
Output level :	TTL level
Remote Control Input Connector :
	3.5 mm dia. mini-jack
Power Supply :
U.S.A./Canada :	120 V AC, 60 Hz
U.K./AUSTRALIA :	240 V AC, 50 Hz
EUROPE :	230 V AC, 50 Hz
Power Consumption :	27 watts
Dimensions (WxHxD) :	482 x 150.5 x 353 mm
	(19" x 6-3/32" x 13-7/8")
Weight :	7.2 kg (15.9 lbs.)

ÉIn these specifications, 0 dBV is referenced to 1.0 Vrms. However, actual voltage levels are also given in parentheses (0.316 V for -10 dBV rounded off to 0.3 V)

ÉChanges in specifications and features may be made without notice or obligation.

30