Tascam DA-302 Features and Controls Rear panel, Analog Unbalanced connectors, Digital connectors

Section 4 : Features and Controls

4-2. Rear panel

zANALOG (UNBALANCED) connectors

IN (L, R):

Analog input connectors for Deck 1.

áDuring dual recording or continuous recording, these connectors are used as the input connectors common for Deck 1 and Deck 2.

OUT 1 (L, R):

Analog output connectors for Deck 1.

OUT 2 (L, R):

Analog output connectors for Deck 2.

CASCADE OUT (L, R):

When more than one DA-302 is used, output analog signals from these connectors. (œp.26)

áTo select signals for output, refer to "Cas Out" on the menu. (œp.28)

xDIGITAL connectors

INPUTS (1, 2):

Digital input connectors for Deck 1 and Deck 2.

OUTPUTS (1, 2):

Digital output connectors for Deck 1 and Deck 2.

CASCADE OUT:

When using more than one DA-302, output digital signals from this connector.

áTo select signals for output, refer to "Cas Out" on the menu. (œp.28)

cEXT CONTROL connectors

Use when connecting more than one DA-302 using the optional WR-7000 connection cable. (œp.26)

vREMOTE IN connector

Connect the provided RC-D302 remote control unit.

13