Convenient functions, Memo1 0Á05ª42£

Section 8 : Convenient functions

8-1. Rec muting

When the REC MUTE key is pressed during recording, no signals are recorded for about 4 seconds and the Record- Pause mode is engaged.

áIf the REC MUTE key has been held for 4 seconds or more, releasing the key engages the Record-Pause mode.

8-2. Skip search

This function lets you search for a Start ID.

1 When the å key is pressed once in the Stop/Play- Pause/Play mode, the previous Start ID is searched. If the ø key is pressed, the next Start ID is searched. After the search is complete, tape playback starts.

2 To search other Start IDs, simply press the å or

økey as many times as required.

áThe number of times you have pressed the key is shown in the program number display.

ÉIf the STANDBY key is set to ON, the Play-Pause mode is engaged after search.

8-3. Direct search

This function searches for a specific program number and plays back the corresponding program. This function can be used only with the remote control unit.

1 In the Stop/Play-Pause/Play mode, press the program number with the numeric keypad. The specified pro- gram number blinks in the program number display.

áIf you press the wrong program number, press the CLEAR key to re-enter the program number.

2 Pressing the START key starts playback after search.

ÉIf the STANDBY key is set to ON, the Play-Pause mode is engaged after search.

8-4. Locating function

This allows you to set a memo point (one point) based on the ABS time. You can access this point directly with the Locate function.

8-4-1. Setting the memo point

1 Press the COUNTER MODE key to set the time mode to ABS time.

2 Press the RESET/MEMO (ABS) key at the point where you want to set the memo point. That point is stored in memory.

áSetting is possible in any tape running mode.

ÉWhen a new memo point is set, the previous memo point is erased.

8-4-2. Correcting the memo point

1 Press the SELECT 1/2 key to select the deck.

2 Press the MENU key to show the following menu in the time display. The set memo point is shown.

Memo1 0Á05ª42£

3 Pressing the UP/DOWN key allows you to change the memo point second by second.

áPress the UP and DOWN keys simultaneously or the CLEAR key on the remote control unit to clear the memo point.

After clearing the memo point, you can enter numerical values with the numeric keypad on the remote control unit.

8-4-3. Locating a memo point

Press the PLAY key while pressing the STOP key in the Stop mode. The memo point is located and playback starts.

áWhen using the remote control unit, press the LOCATE key.

ÉIf the STANDBY key is set to ON, the Play-Pause mode is engaged after the memo point has been located.