Harbor Freight Tools 95014 Product Specifications, Save this Manual, Unpacking

Page 2

 

PRODUCT SPECIFICATIONS

 

 

 

 

 

Item

Description

 

 

Media Tank Capacity

110 Pounds or 20 Gallons

 

 

Working PSI

60 to 125 PSI

 

 

Air Consumption

6 CFM @ 60 PSI / 25 CFM @ 125 PSI (with 3/8” Hose)

 

 

Air Inlet Size

1/4”-18 NPT

 

 

Water Trap Type

Push Button to Drain

 

 

Hose Dimensions

1/2” I.D. x 1” O.D. x 8’-6” Long

 

 

Pressure Gauge Indicator

0 <-> 150 PSI (White Face / Red Numbers)

 

 

Recommended Media Type

Glass Bead / Silicon Carbide

 

 

 

Alumina / Walnut Shell / Brass Bead

 

 

Accessories

Safety Hood / Blast Gun / Funnel

 

 

 

Ceramic Nozzles (2.0mm, 2.5mm, 3mm)

 

 

Overall Dimensions

35-1/2” High x 15” Diameter

 

 

Unit Weight

60 Pounds

 

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.

UNPACKING

When unpacking, check to make sure that all the parts and accessories listed on pages 15 and 16 are included, and the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

SAFETY WARNINGS AND PRECAUTIONS

1.Do not operate the Pressurized Abrasive Blaster if the Air Supply Valve

(18)does not turn the tool on or off. Any tool that cannot be controlled with its Air Supply Valve is dangerous and must be replaced.

2.Keep work area clean. Cluttered areas invite accidents.

3.WARNING! Do not operate pneumatic equipment in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Pneumatic equipment can create sparks which may ignite flammables.

SKU 95014 For technical questions, please call 1-800-444-3353 PAGE 2

Image 2
Contents Pressurized Abrasive Blaster For technical questions, please callSave this Manual Product SpecificationsSafety Warnings and Precautions UnpackingPage Page SKU For technical questions, please call SKU For technical questions, please call Assembly Instructions See Figure BTo Attach The Abrasive Hose And Blast Gun See Figure D Operating InstructionsSee Figure D, next Figure E Figure F See Figure FINSPECTION, MAINTENANCE, and Cleaning Please Read the Following Carefully Troubleshooting Problem Possible SolutionParts List & Assembly Diagram AIR Blaster Description QtyParts List & Assembly Diagram Blast GUN Warranty