Harbor Freight Tools 95014 operating instructions SKU For technical questions, please call

Page 6

6.Use respiratory protection when source controls cannot keep silica exposures below the recommended levels.

7.Provide periodic medical examinations for all workers who may be exposed to crystalline silica.

8.Post signs to warn workers about the hazard and to inform them about re quired protective equipment.

9.Provide workers with training that includes information about health effects, work practices, and protective equipment for crystalline silica.

10.Report all cases of silicosis to State health departments and to OSHA or the Mine Safety and Health Administration (MSHA).

31. WARNING! The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code 25249.5 , et seq.)

32. WARNING! The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

SKU 95014

For technical questions, please call 1-800-444-3353

PAGE 6

Image 6
Contents Pressurized Abrasive Blaster For technical questions, please callSave this Manual Product SpecificationsSafety Warnings and Precautions UnpackingPage Page SKU For technical questions, please call SKU For technical questions, please call Assembly Instructions See Figure BTo Attach The Abrasive Hose And Blast Gun Operating Instructions See Figure D, nextSee Figure D Figure E Figure F See Figure FINSPECTION, MAINTENANCE, and Cleaning Please Read the Following Carefully Troubleshooting Problem Possible SolutionParts List & Assembly Diagram AIR Blaster Description QtyParts List & Assembly Diagram Blast GUN Warranty