outlined in the manufacturer’s manual for the object you intend to sandblast.
28.Avoid unintentional starting. Make sure the Control Lever (42C) on the Blast Gun is in its “OFF” or “CLOSED” position when the tool is not being used.
29.
WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contain chemicals known (to the State of California) to cause cancer, birth defects, or other reproductive harm.
Some examples of these chemicals are:
*Lead from
*Crystalline silica from bricks, cement, and other masonry products,
*Arsenic and chromium from chemically treated lumber.
(California Health & Safety Code 25249.5, et seq.)
30.
WARNING! Abrasive blasting with media containing crystalline silica can cause serious or fatal respiratory disease. Exposure to crystalline silica may cause silicosis (a serious lung disease), cancer, and death. Exposure to aluminum oxide (a dust generated from material removing processes) can result in eye, skin, and breathing irritation. Always use an ANSI approved respirator, safety impact eye glasses, and a full face shield. Avoid skin exposure. Proper ventilation in the work area is required. Read and understand the ten recommended measures below to reduce crystalline silica exposure in the workplace and prevent silicosis and silicosis related injuries and deaths.
The following ten measures are recommended to reduce crystalline silica exposures in the workplace and prevent silicosis and silicosis related injuries and deaths:
1.Prohibit silica sand (or other substances containing more than 1% crystalline silica) as an abrasive blasting material and substitute less hazardous materials.
2.Conduct air monitoring to measure worker exposures.
3.Use containment methods such as
4.Practice good personal hygiene to avoid unecessary exposure to silica dust.
5.Wear washable or disposable protective clothes at the worksite. Shower, and change into clean clothes before leaving the worksite to prevent contamination of cars, homes, and other work areas.
SKU 95014 | For technical questions, please call | PAGE 5 |