ASSEMBLY INSTRUCTIONS
For more detailed information on how to assemble this pressure washer, please visit www.karcherresidential.com/as- sembly
Required tools
APhilips Screwdriver, medium size (not supplied)
for final assembly
Assembly
Mount loose parts delivered with appli- ance prior to
Install wheels and hub caps
STEP 1:
Insert the wheel into the body, rotat- ing the wheel as you push it into place. You should hear a click when the wheel is completely inserted. Then push the wheel cap into place on the wheel, press around edges and the center of the wheel cap to make sure it is properly seated. You should hear another click. Do not proceed with the assembly until the wheels are securely installed.
Install the storage for hand-spray gun
STEP 2:
Place the bottom holder into the re- cesses and push forward until it au- dibly locks in.
Insert the top holder and push down all the way.
Install the storage hook for the mains connection cable
STEP 3:
Press in the storage hook and lock it into the top position.
Install the transport handle
Before assembling the handle you need to place the tubes of the deter- gent regulator between handle and machine body.
STEP 4:
Attach detergent hose to the fitting, as indicated below.
Slide the transport handle into the guide and secure it with 2 screws.
6English