Install high pressure hose to hose drum
STEP 7:
Slide the retention clip on the reel (as indicated by “1” below) then completely push the high pressure hose in (as indicated by “2” below) until you hear a click.
Tug on the hose before proceeding to make sure it is securely installed. It should not come loose when you tug on it.
Connect the high pressure hose to the hand spray gun
STEP 8:
Push the high pressure hose into the trigger gun until it locks audibly. Note: Make sure the connection nipple is aligned correctly.
Check the secure connection by pulling on the high pressure hose.
Disconnect:
Press the disconnect key on the trigger gun and remove the high pressure hose from the trigger gun.
8English