Karcher K 5.68 M Working with Detergents, Always Use Kärcher Detergent for Best Results

WORKING WITH DETERGENTS

Detergents can only be applied at low pressure setting (Mix).

STEP 1:

Install the Vario Power Spray Wand. Set the spray wand to the low pres- sure setting (Mix).

 STEP 2:

Fill a container with Kärcher deter- gent. Place the filter end of detergent suction tube into the container.

STEP 3:

Turn on the pressure washer (I). Pull trigger to operate unit. Liquid deter- gent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.

STEP 4:

To rinse, move the VPS out of „Mix“ position and pull trigger to operate unit.

STEP 5:

Cleaning up: Always draw fresh wa- ter through the detergent tank or si- phon tube when done to flush any remaining detergents from the injec- tion system.

For best results see Cleaning Tips for specific information on how to clean different surfaces.

Always Use Kärcher® Detergent for

Best Results

Kärcher® biodegradable detergents are specially formulated to protect the envi- ronment and your pressure washer. The special formula won’t clog the suction tube filter and will protect the internal parts of the pressure washer for a long- er life. For Kärcher® Detergents, check your retailer or visit our website: www.buykarcher.com

￿CAUTION

Never use:

–Bleach, Chlorine products and other corrosive chemicals

–Liquids containing solvents (i.e., paint thinners, gasoline, oils)

–Tri-sodium phosphate products

–Ammonia products

–Acid-based products

These chemicals will harm the unit and will damage the surface being cleaned.

Use of these items will void the war- ranty.

English 9