Craftsman 919.769062, D28234 owner manual Risk to Fluid Injection, Risk of Chemical Burn

Page 5

HAZARD

RISK OF INJURY OR PROPERTY DAMAGE WHEN TRANSPORTING OR STORING

WHAT CAN HAPPEN

Fuel or oil can leak or spill and could result in fire or breathing hazard, serious injury or death can result. Fuel or oil leaks will damage carpet, paint or other surfaces in vehicles or trailers.

HOW TO PREVENT IT

If pressure washer is equipped with a fuel shut-off valve, turn the valve to the off position before transporting to avoid fuel leaks. If pressure washer is not equipped with a fuel shut-off valve, drain the fuel from tank before transporting. Only transport fuel in an OSHA approved container. Always place pressure washer on a protective mat when transporting to protect against dam- age to vehicle from leaks. Remove pressure washer from vehicle immediately upon arrival at your destination.

HAZARD

RISK TO FLUID

INJECTION

WHAT CAN HAPPEN

Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

Injuries can result if system pressure is not reduced before attempting maintenance or disassembly.

HOW TO PREVENT IT

Never place hands in front of nozzle.

Direct spray away from self and others.

Make sure hose and fittings are tightened and in good condition. Never hold onto the hose or fittings during operation.

Do not allow hose to contact muffler.

Never attach or remove wand or hose fittings while system is pressurized.

To relieve system pressure, shut off engine, turn off water supply, and pull gun trigger until water stops flowing.

Use only hoses and accessories rated for pressure higher than your pressure washer's p.s.i.

HAZARD

RISK OF CHEMICAL BURN

WHAT CAN HAPPEN

HOW TO PREVENT IT

Use of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flam- mable solvent with this product could re- sult in serious injury or death.

Do not use acids, gasoline, kerosene, or any other flammable materials in this product. Use only household detergents, cleaners and degreasers recommended for use in pressure washers.

Wear protective clothing to protect eyes and skin from contact with sprayed materials.

5- ENG

D28234

Image 5
Contents Pressure Washer Table of Contents Engine Specification ChartModel No 919-769062 Pressure Washer Risk to Breathing Maintenance InstructionsRisk of Explosion or Fire Risk of Chemical Burn Risk to Fluid InjectionRisk of HOT Surfaces Risk of Unsafe OperationRisk of Electrical Shock BOX Contents Assembly Throttle Control Lever Controls engine speed OperationHOW to USE Spray Wand To Adjust PressureTo Shut Down HOW to Apply Chemicals and Cleaning SolventsBefore Starting Maintenance Engine Maintenance TaskCustomer Responsibilities Table EngineInspect CleaningTo Change Oil Wand Clean and Replace Spark PlugPump Engine Preparation StorageProblem Cause Correction Troubleshooting GuideProblem Cause Correction Problemcause Garantía Tabla DE ContenidosNormas DE Seguridad / Definiciones Gráfico DE EspecificacionesModelo N 919-769062 Lavadora a presión RPM del MotorCómo Prevenirlo RiesgoQUÉ Puede Ocurrir Riesgo DE Inyección DE Fluido Riesgo DE Funcionamiento Inseguro Contenido DE LA Caja Ensamblaje Motor Lavadora a PresiónCómo Utilizar LA Varilla Rociadora Terminología DE LA Lavadora a PresiónRegulación DE LA Presión Procedimiento DE Apagado Cómo Emplear Productos Químicos Y Solventes Para LimpiezaAntes DE Comenzar Mantenimiento Motor Tabla DE Responsabilidades DEL Cliente Tarea DELavadora a Presión Verificación del aceiteLimpieza Cambio de aceiteInspección Varilla Rociadora Limpieza y reemplazo de las bujíasBomba Preparación del motor AlmacenajeProblema Causa Corrección Guía DE Diagnóstico DE ProblemasContinuación Nada o baja Sello gastado o LE-FOYERMC SU-HOGARSM