ASSEMBLY
1.Place handle assembly onto frame and connect handle to frame. NOTE: Knobs are assembled to inside of frame.
Remove
Loosen
2.Connect wand to gun. Tighten securely.
c.Place grooves in accessories panel assembly onto screws and slide panel assembly into place.
3.Attach high pressure hose to gun. Tighten securely.
5.To Assemble Accessories Panel
a.Remove top screws on handle assembly.
b.Loosen bottom screws on handle assembly.
Screws
d.Place screws (removed earlier) into the top holes and secure accessories panel assembly to handles. Do not overtighten.
D28234 | 8- ENG |